User manual

14
NET 30
Terms
Security
section
14
243
www.mcmelectronics.com
Video Motion
Detector
Motion detection
by digital signal
processing allows
this unit to be placed
at the monitor end
of the system out of
sight. Compatible
with color or black
and white cameras.
Four sensitivity levels. Easy to connect in-line with
the camera’s video cable. Adjustable detection time,
0.6 second or 3 seconds selectable to trigger alarm.
Alarm output: Buzzer, 9VDC, N.O. contact. N.C.
contact. Power: 9VDC, 300mA via supplied adaptor.
Note: The Video Motion Detector is designed to be
installed after the camera and before switchers,
etc. Improper installation will result in
continuous alarm.
Order # (ea.)
82-9270 $81.55
Front
Back
VideoEase™
CCTV Mini Balun
The VideoEase™
CCTV Mini Balun
allows a single
CCTV video signal
to be transmitted via
cost-effective unshielded twisted pair (UTP) cable.
Used in pairs, the CCTV balun eliminates costly
and bulky coaxial cable, allowing CCTV security
and surveillance equipment to be connected using
standard structured cabling techniques for neater
and more streamlined cabling. The flexible mini
coax cable lead allows the product to fit neatly
inside CCTV camera back boxes and dome
camera enclosures. The CCTV balun also works
in conjunction with other MuxLab CCTV baluns
such as the 500000, 500009 and 500015 for a
complete cabling solution. Features and benefits:
•Fits inside CCTV dome cameras and back boxes
•Compatible with other MuxLab CCTV baluns •Up
to 2200' (670m) via Cat 5 UTP •Cable strain relief
Order # Mfr. # (ea.)
33-9760 500023 $39.95
BNC Video
Baluns
Ideal for distributed CCTV video over Cat 5e UTP
wire, these BNC video baluns feature two styles to
accommodate flexible connections. Features: •BNC
to screw terminal connections •Durable weatherproof
potted construction •Precise 75ohm impedance
matching •1,250' range in color; 2,500' range in B/W
•Input: 1V p-p composite video •Output: Low voltage
current loop to receiver unit •Signal noise ratio: 76dB
•Dimensions: 1.25" x 1.5" x .75"
Order # Description (1-9)
82-11330 w/o 12" pigtail $19.95
82-11331 w/12" pigtail 21.95
#82-11330
#82-11331
DVR Mount
BNC Video Balun
Unique slim-line design ideally suited for mounting to
DVR BNC connections to distributed CCTV video over
Cat 5e UTP wire. Features: •BNC to push-down
locking terminal connections •Precise 75ohm
impedance matching •1,750' range in color; 3,000'
range in B/W •Input: 1V p-p composite video •Signal
noise ratio: 76dB •Dimensions: 1.5" x 0.5" x .625"
Order # (1-9)
82-11332 $20.95
16 Port Passive Transceiver
Use with passive transceiver/baluns as a receiver
or transmitter for distances up to 2000'. Use with
active receivers to transmit to distances up to
3200'. Power supply included.
Order # (ea.)
82-9340 $282.00
Video Balun
The VideoEase CCTV balun
allows a single CCTV video
signal to be transmitted via
cost effective unshielded
twisted pair (UTP) cable. The CCTV balun eliminates
costly and bulky coaxial cable, allowing CCTV security
and surveillance equipment to be connected using
standard structured cabling techniques for neater
and more streamlined cabling. The CCTV balun is
available in two models; CCTV Screw Terminal Balun
(500009) and Modular CCTV Balun (500000). Both
models may be used interchangeably. Features:
Up to 2200' via Cat 5 UTP, low return loss, lifetime
warranty. Pair required for use, sold individually.
Order # Mfr. # Description (ea.)
82-9485 500000 Modular $34.95
82-9490 500009 Terminal 37.95
BNC Video Balun
Use to send composite video
signal over Cat 5 cable, this
balun’s very compact size
and male BNC connector
makes for easy attachment
directly to equipment
including monitors,
processors and cameras.
Due to their low cost, and
slim design, multiple units
may be connected side–by–side to equipment.
A specially designed tool–less IDC connector provides
quick, reliable connection to unterminated Cat 5
cable. Specifications: •Bandwidth: 50Hz~8MHz
•Dimensions (excluding connector): 0.625" (H) x
0.625" (W) x 1.563" (L)
Order # MSRP (1–3) (4–up)
50-7750 $25.95 $15.79 $15.09
Front
Back
BNC Video +
DC Power Balun
Use to send composite
video signal and low
voltage DC over Cat 5
cable. This balun’s very
compact size and male
BNC connector makes for
easy attachment directly
to equipment such as
monitors, processors and cameras. In addition to the
BNC connection, two screw terminals are provided for
direct access to a second cable pair. This is ideal for
remotely providing DC power to devices such as
surveillance cameras and small LCD television
monitors. Utilizes two cable pairs: •Pin 7/8 video
•Pin 4 power (+) •Pin 5 power (–) Specifications:
•Maximum distance: 1000' •Bandwidth: 50Hz~8MHz
•Maximum recommended distance for power: 300'
(using 12VDC, 500mA) •Dimensions (excluding
connector): 1.0" (H) x 0.85" (W) x 2.0" (L)
Order # MSRP (1–3) (4–up)
50-7745 $35.95 $19.95 $17.95
Front
Back
BNC Video + DC Power Balun
Use to send composite video
signal and low voltage
DC over Cat 5
cable. This compact
balun features a male
BNC connector, attached to an 8" pigtail, for easy
attachment directly to equipment. In addition to the
BNC connection, two screw terminals are provided
for direct access to two cable pairs (in parallel).
This is ideal for remotely providing DC power to
devices such as surveillance cameras and small LCD
television monitors. Utilizes three cable pairs: •Pin
7/8 video •Pins 1/2 power (+) •Pins 4/5 power (-)
Specifications: •Bandwidth: 50Hz~8MHz
•Distance: 1000' (Cat 5), •Maximum recommended
distance for power: 300' (using 12VDC, 500mA)
•Dimensions (excluding connector):
1.0" (H) x 0.85" (W) x 2.0" (L)
Order # MSRP (1-3) (4-up)
50-7746 $39.95 $21.95 $18.75
BNC Video Balun
Use to send composite
video signal over Cat 5
cable, this compact
balun features a male
BNC connector attached to
the end of an 8" pigtail. Due to
their low cost, and slim design, multiple units may
be connected side-by-side to equipment. A specially
designed tool-less IDC connector provides quick,
reliable connection to unterminated Cat 5 cable.
Specifications: •Bandwidth: 50Hz~8MHz
•Distance: 1000' max, using 24AWG UTP
•Dimensions (excluding connector): 0.625" (H)
x 0.625" (W) x 1.563" (L)
Order # MSRP (1-3) (4-up)
50-7751 $29.95 $17.79 $15.25
Video and Power
Transmission
System
Transmit power
and video signals
over standard UTP
Cat 5 cables. The
video/power balun
carries DC power
along with video
over standard UTP
cable. The built-in
DC plug on the
video/power balun
at the camera end
(#82-9300) receives
power from the
transmitter (#82-9295). The male BNC to RJ-45
jack converts 75ohm video to 100ohm video for use
with enconomical UTP Cat 5 cables. To monitor and
record the signals use the four channel video balun
(#82-8140) to break the signal back out. The four
channel video balun converts a single 100ohm
RJ-45 single to four 75ohm BNC for transmission over
coaxial cable. Transmits distances up to 1000' for color
video and 2000' for black and white. Using Cat 5e
or greater can increase distances by 20%.
Order # Description MSRP (ea.)
82-9295 Video/power transmitter $39.95 $23.95
82-9300 4 UTP to 1 UTP receiver/transmitter 69.95 35.95
82-8140 1 UTP to 4 coax reciever/transmitter 59.95 42.95
Connect
w/CAT5 Cable
To Display
To Camera
#82-9300
#82-9295
#82-8140
Back
Back
Back
Video Baluns
C53_pg_242-243 8/13/08 10:42 AM Page 243