User manual

Twisted Pair
Alarm Wire
Twisted pair alarm wire for use in new alarm
installation and upgrades. 22AWG and 18AWG solid
conductor. Color coded PVC insulation, white and
light gray, for easy identification.
Order # Length AWG. (ea.) (2-4) (5-up)
24-2455 100' 22 $17.95 $15.00 $13.97
24-2460 500' 22 76.95 69.33 64.10
24-2470 100' 18 15.95 13.32 12.40
24-2480 1000' 18 177.00 160.23 146.88
14
Security
section
14
264
1-800-543-4330
Fax [phone]
Alarm Wire
Glass Break Detectors
Modules
Foil Block
The double foil block is made from
acrylic plastic and has an extended
plate. The foil block cover is made from white acrylic
plastic. The cover clips on to the foil block to conceal
connections and for neater installation.
Order # (1-9) (10-up)
SR00158 $0.89 $0.72
Aluminium Foil Loop
Aluminium conductive
foil to detect forced
entry via glass doors,
windows, skylights or even
partitioned walls. The tape
easily breaks, creating an open circuit which an alarm
system can detect. The self-adhesive foil has a width
of 9mm and has a liner for ease of use. 45m reel.
Order # (1-9) (10-up)
SR00001 $2.79 $2.69
Vibration Detector
•Senses vibration in walls,
ceilings, safes, etc. •Mounts
in any position •Adjustable
sensitivity •Silver contacts
rated at 100mA, 50VDC, 5W
•Tamper-proof cover •Closed circuit operation
•Dimensions:
3
⁄8" (W) x 2
1
⁄4" (H) x
3
⁄4" (D)
Order # (1-3) (4-up)
82-180 $5.83 $5.38
High Current Power
Supply/Chargers
These high efficiency, high current power supplies
provide the power needed by more demanding
security and access control applications, without
giving off extra heat. They range in output voltage
from 6~24VDC and current from 2.5A~10A.
Order # Mfr. # Voltage Current (ea.)
82-3160 SMP3 6, 12, 18, 24 2.5 $49.15
82-3165 SMP5 6, 12, 18, 24 4.0 70.65
Power Supply
The ELK-624 is
engineered to be
a trouble-free,
general-purpose
power supply/charger. It is ideal for alarm, access
control, and CCTV applications. The ELK-624
features automatic reset “fuseless” overload
protection which eliminates service calls to replace
blown fuses. On-board diagnostic LEDs visually
indicate the presence of the AC charging and CE
output voltages. The output voltage is easily selected
with easy to change mini-jumpers. These features,
along with the compact size make the ELK-624
power supply/charger a must-have for your next job.
Specifications: Size: 3" x 3" (76.2mm x 76.2mm).
Standby battery capacity: 1.2~10AH. Auto-reset
overload protection: 2.5A. 6V setting: Transformer
input: 12VAC, 40VA. Continuous output current:
1.2A*. 12V setting: Transformer input: 16.5VAC,
40VA. Continuous output current: 1.0A.
24V setting: Transformer input: 24VAC, 40VA.
Continuous output current: 800mA. *Higher output
current (up to 2.5A) may be drawn for a short time
provided a fully charged battery is connected.
Order # (ea.)
82-2165 $29.95
Programmable Timer
The PT724 is an advanced seven day/24 hour event
timer that is simple to program and allows for
scheduling of multiple events over the course of
a one week period. 12~24VAC or DC operation.
Form “C” relay contacts are rated at 10A at
120VAC/28VDC. Mfr. #PT724.
Order # (ea.)
82-3175 $114.00
Timer Module
Timer can be set to open or
close the relay at the start or
end of a timing cycle from 1 to
60 seconds. Can be triggered by
positive DC voltage, dry contact
closure or open dry contact. The
relay can be programmed to
pulse activate or activate for
one second at the end of the
timing cycle. Built-in reset function to manually reset
timing cycle. Specifications: Relay: Form-C relay,
8A, 120VAC/24VDC. Timer: 12VDC/24VDC, 3mA
(standby) 40mA (relay energized).
Order # (ea.)
82-8590 $23.95
Delay Timer
The ELK-960 Delay
Timer is an economical
and flexible solution for
many general-purpose
time delay applications.
The unit can be configured for use on either 12V or
24V systems, with positive or negative trigger logic.
Trigger voltage can be as low as 4V, making the
ELK-960 compatible with 5V logic outputs. Set-up is
quick and easy with thumbwheel adjustment between
1 and 60 seconds. A quick jumper setting converts the
time from seconds to minutes. The timer can be
configured to activate once for each trigger (one-shot
mode), or pulse as soon as power is applied (repeat
mode). Relay can be configured to be normally on or
normally off. Specifications: Time settings: 1 sec~60
min. Relay contact rating: 7A @ 30VDC. Trigger
voltage: 4~27VDC. Input trigger current: 1.2mA.
Current draw with relay on: 40mA. Size: 3" (W) x 2.2"
(H) x 1" (D) (fits std. snap track). 12V setting:
Nominal operating voltage: 9~15VDC. 24V setting:
Nominal operating voltage: 21~27VDC.
Order # (ea.)
82-2190 $36.95
Programmable
Timer Modules
12 or 24VDC selectable
operation. Quick and
accurate time range
adjustment from
1 sec. to 60 minutes. LED indicates relay is
energized. Form “C” relay contacts are rated 8A at
120VAC/28VDC. Triggered by application of positive
voltage, dry contact closure, or release of contact
closure. Selectable relay activation at the start
or end of the timing cycle. Mfr. #6062.
Order # (ea.)
82-3220 $28.95
Compact Relay
The ELK-912 is a high
quality 12VDC relay. It
features SPDT form “C”
heavy-duty dry contacts,
low current draw,
and positive or negative activation. All units are
conviently packed in a reusable poly storage box.
Specifications: Operating voltage: 12VDC nom.
Current draw: 30 milliamps. Minimum pull-in
voltage: 9VDC. Diode protection across relay coil.
Contact ratings: 7A @ 30VDC, 10A @ 125VAC.
Size: 1.1" (W) x 1.55" (H) (28mm x 39mm).
Order # (ea.)
82-2175 $12.07
Relay Modules
12 or 24VDC selectable
operation. 3~24VDC,
1mA positive or negative
trigger. Double form “C”
2A, 120VAC/28VDC contacts. Mfr. #RBSN-TTL.
Order # (ea.)
82-3210 $18.40
Relay Modules
Each cluster contains
six relay modules which
can be separated by
simply snapping them
apart. 12 or 24VDC selectable operation. Single form
“C” 10A/120VAC or 28VDC relay contact. Screw
terminals handle up to 12 gauge wire. Mfr. #RB610.
Order # (ea.)
82-3200 $42.95
C53_pg_264-265 8/13/08 11:32 AM Page 264