Specifications
453
23
www.MCMelectronics.com
/
1-800-543-4330
Section
23
SECURITY
Compact Relay
The ELK-912 is a high
quality 12VDC relay. It
features SPDT form “C”
heavy-duty dry contacts, low
current draw, and positive or negative activation. All
units are conviently packed in a reusable poly storage
box. Specifications: Operating voltage: 12VDC nom.
Current draw: 30 milliamps. Minimum pull-in voltage:
9VDC. Diode protection across relay coil. Contact
ratings: 7A @ 30VDC, 10A @ 125VAC. Size: 1.1" (W)
x 1.55" (H) (28mm x 39mm).
Order # ONLY
82-2175 $12.99
Sensitive Relay
The ELK-924 is a
sensitive relay which
offers positive (+) or
negative (-) trigger
activation on as low as 1.2mA of current. It is ideal
for access control, home automation, and many other
general purpose switching applications. The ELK-924
features switch selectable 12 or 24VDC operation,
DPDT form “C” heavy-duty contacts, and an LED
status indicator. Specifications: Operating voltage:
12~24VDC “switch selectable”. Trigger current: 1.2mA
@ 12VDC. Trigger voltage: 4~24VDC. Nominal
current draw: 60mA. Double form “C” contacts rated
for: 7A @ 30VDC, 10A @ 125VAC. Diode protection
across relay coils. Size: 1.5" (W) x 2.75" (H).
Order # ONLY
82-2180 $18.49
Delay Timer
The ELK-960 Delay Timer
can be configured for use
on either 12V or 24V
systems, with positive or negative trigger logic. Trigger
voltage can be as low as 4V, making the ELK-960
compatible with 5V logic outputs. A quick jumper
setting converts the time from seconds to minutes.
The timer can be configured to activate once for each
trigger (one-shot mode), or pulse as soon as power is
applied (repeat mode). Relay can be configured to be
normally on or normally off. Specifications: Time
settings: 1 sec~60 min. Relay contact rating: 7A @
30VDC. Trigger voltage: 4~27VDC. Input trigger
current: 1.2mA. Current draw with relay on: 40mA.
Size: 3" (W) x 2.2" (H) x 1" (D) (fits std. snap track).
12V setting: Nominal operating voltage: 9~15VDC.
24V setting: Nominal operating voltage: 21~27VDC.
Order # ONLY
82-2190 $40.49
Power
Supply
The ELK-624 features
automatic reset “fuseless”
overload protection which
eliminates service calls to replace blown fuses.
Specifications: Size: 3" x 3" (76.2mm x 76.2mm).
Standby battery capacity: 1.2~10AH. Auto-reset
overload protection: 2.5A. 6V setting: Transformer
input: 12VAC, 40VA. Continuous output current:
1.2A*. 12V setting: Transformer input: 16.5VAC,
40VA. Continuous output current: 1.0A. 24V setting:
Transformer input: 24VAC, 40VA. Continuous output
current: 800mA. *Higher output current (up to 2.5A)
may be drawn for a short time provided a fully charged
battery is connected.
Order # ONLY
82-2165 $30.99
Relay Modules
Each cluster contains six
relay modules which can
be separated by simply
snapping them apart. 12
or 24VDC selectable operation. Single form “C”
10A/120VAC or 28VDC relay contact. Screw terminals
handle up to 12 gauge wire. Mfr. #RB610.
Order # ONLY
82-3200 $44.49
Relay Modules
12 or 24VDC selectable
operation. 3~24VDC, 1mA
positive or negative trigger.
Double form “C” 2A,
120VAC/28VDC contacts. Mfr. #RBSN-TTL.
Order # ONLY
82-3210 $19.49
High Current Power
Supply/Chargers
These high efficiency, high current power supplies
provide the power needed by more demanding security
and access control applications, without giving off
extra heat. They range in output voltage from
6~24VDC and current from 2.5A~10A.
Order # Mfr. # Voltage Current ONLY
82-3160 SMP3 6, 12, 18, 24 2.5 $50.99
82-3165 SMP5 6, 12, 18, 24 4.0 73.49
Programmable
Timer Modules
12 or 24VDC selectable
operation. Quick and
accurate time range
adjustment from 1 sec. to 60
minutes. LED indicates relay is energized. Form
“C” relay contacts are rated 8A at 120VAC/28VDC.
Triggered by application of positive voltage, dry
contact closure, or release of contact closure.
Selectable relay activation at the start or end
of the timing cycle. Mfr. #6062.
Order # ONLY
82-3220 $30.99
Power Supplies/
Chargers
•Switch selectable DC
voltage output (6, 12,
24VDC) •Regulated and
filtered output voltage
•Short circuit protection
•Thermal protection and
compensation •Built-in
back-up battery charger
•Switches to back-up
battery automatically in
case of power loss •Fused
protection for battery
charger •Two LEDs to
indicate AC power input and DC power output status
•Compatible with lead acid or gel-type rechargeable
battery •Reverse polarity protected •Low operating
temperature •Battery leads and foam tape included.
DC Continuous Peak
Order # Voltage Current Current ONLY
82-12780 6, 12 1.5A 2.0A $15.49
82-12781 6, 12, 24 1.5A 2.0A 17.99
82-12782 6, 12, 24 2.5A 3.0A 41.49
82-12783 6, 12, 24 4.0A 5.0A 51.99
82-12784 6, 12, 24 7.0A 7.5A 82.49
82-12785 6, 12, 24 10.0A 10.0A 134.00
#82-12782
Low Voltage Miniature Delay Time Module
This timer module will extend the activation time of
a momentary contact switch for 1~60 seconds via a
field-adjustable rotary pot. It is ideal for electrical locks
which do not have a built-in time delay function. Its
compact size makes it small enough to fit in a single-
gang box or inside a door frame cavity. Features:
•Adjustable timer from 1~60 seconds via a pot on board
•NO/NC switch trigger •Compact design: 1
3
⁄16" x 2
9
⁄32" x
5
⁄8" •Operating voltage: 12~24VAC or DC •Current:
1.8mA •Relay output: Form-C (SPDT) via wires
•Contact rating: 3A@24VDC •Built-in buzzer output
(150mA@24VDC) •Includes double-sided foam tape
•Mfr. #SA-026Q
Order # ONLY
82-13995 $25.49
Annual Timer Module
These relays can be used to control devices in many
applications such as Security, Access Control, Lighting
and Environmental Control. The form C relays can be
programmed to operate in shunt or momentary mode
for up to 50 unique events. Each event can be
programmed on a weekly or daily schedule. Block
Coding can be programmed to repeat the operation of
the relays on consecutive days. Features: •Two N.O. or
N.C. form C relays 10A @ 120VAC/28VDC •Can be
programmed for password protection •Tandem mode
allows both relays to operate simultaneously •EEPROM
memory for data safe storage protection when power
failed •Alpha-numeric and back lit LCD display for
easy programming •Size: 5
5
⁄16" x 3" x
15
⁄16"
•Mfr. #SA-027Q
Order # ONLY
82-14000 $80.99
Compact Alarm Control Module
A compact loop alarm for a variety
of intruder entry and anti-theft
applications including anti-shoplifting
alarms, intruder alert, boat, caravan or
vehicle alarms, storeroom protection, etc.
All connections are via screw terminals
for easy installation, and the unit is supplied in an
impact resistant enclosure. Supply voltage: 9~15VDC.
Switched output: 1A continuous.
Order # (1-4) (5-up)
SR00036 $54.99 $49.40
Modules
NEW!
NEW!