Specifications

429
23
www.MCMelectronics.com / 1-800-543-4330
Section
23
SECURITY
Video Coax
Surge Protectors
Protects valuable CCTV equipment
from high voltage surges such as
lightning strikes and voltage spikes.
Specifications: Response time: 100ns. Max surge
current: 5,000A. Insertion loss: <0.2dB. Dimensions:
3" x 1" x 1". Note: Ground lead must be connected to
earth ground for proper operation and protection.
Order # ONLY
82-8485 $20.35
Video Amplifier
Compensate for signal
loss due to long cable
runs. Placement is at
the system (monitor)
end of the cable. Maximum cable length is: RG-59U =
3000', RG-6U = 4500' and RG-11U = 6000'. Separate
low frequency and high frequency gain control.
Order # MSRP ONLY
82-8870 $139.00 $78.49
Video Balun
The VideoEase CCTV balun
allows a single CCTV video signal
to be transmitted via cost effective
unshielded twisted pair (UTP) cable. The CCTV
balun eliminates costly and bulky coaxial cable,
allowing CCTV security and surveillance equipment
to be connected using standard structured cabling
techniques for neater and more streamlined cabling.
The CCTV balun is available in two models; CCTV
Screw Terminal Balun (500009) and Modular
CCTV Balun (500000). Both models may be
used interchangeably. Features: Up to 2200' via
Cat 5 UTP, low return loss, lifetime warranty.
Pair required for use, sold individually.
Order # Mfr. # Description ONLY
82-9485 500000 Modular $27.99
82-9490 500009 Terminal 23.99
DVR Mount BNC
Video Balun
Unique slim-line design ideally
suited for mounting to DVR BNC
connections to distributed CCTV video
over Cat 5e UTP wire. Features: •BNC to push-down
locking terminal connections •Precise 75ohm
impedance matching •1,750' range in color; 3,000'
range in B/W •Input: 1V p-p composite video •Signal
noise ratio: 76dB •Dimensions: 1.5" x 0.5" x .625"
Order # ONLY
82-11332 $21.99
BNC Video
Baluns
Ideal for distributed CCTV video
over Cat 5e UTP wire, these BNC video baluns
feature two styles to accommodate flexible connections.
Features: •BNC to screw terminal connections •Durable
weatherproof potted construction •Precise 75ohm
impedance matching •1,250' range in color; 2,500'
range in B/W •Input: 1V p-p composite video •Output:
Low voltage current loop to receiver unit •Signal noise
ratio: 76dB •Dimensions: 1.25" x 1.5" x .75"
Order # Description ONLY
82-11330 w/o 12" pigtail $20.99
82-11331 w/12" pigtail 22.99
#82-11330
#82-11331
Distribution Amp
Video distribution amp
operates with both color and
black and white systems.
This unit distributes a single
composite video signal to up
to four monitors. Video input/output via
BNC type connector. Mfr. #VID-D.
Order # ONLY
82-10675 $76.49
BNC Video Balun
4Accommodates
component video
4Convenient 8" BNC pigtail
4Accepts unterminated Cat 5 cable
41,000' max distance
Use to send composite video signal over Cat 5 cable,
this compact balun features a male BNC connector
attached to the end of an 8" pigtail. Due to their low
cost, and slim design, multiple units may be connected
side-by-side to equipment. Specifications: •Bandwidth:
50Hz~8MHz •Distance: 1000' max, using 24AWG UTP
•Dimensions (excluding connector): 0.625" (H) x
0.625" (W) x 1.563" (L) Sold individually, must be
used in pairs
Order # MSRP (1-3) (4-up)
50-7751 $29.95 $17.49 $15.29
BNC Video + DC Power Balun
4Accommodates
composite video
4Provides path for
12VDC power
4Convenient 8" BNC pigtail
41,000' max distance
Use to send composite video signal and low voltage
DC over Cat 5 cable. This compact balun features a
male BNC connector, attached to an 8" pigtail, for
easy attachment directly to equipment. In addition to
the BNC connection, two screw terminals are provided
for direct access to two cable pairs (in parallel). This is
ideal for remotely providing DC power to devices such
as surveillance cameras and small LCD television
monitors. Utilizes three cable pairs: •Pin 7/8 video
•Pins 1/2 power (+) •Pins 4/5 power (-) Specifications:
•Bandwidth: 50Hz~8MHz •Distance: 1000' (Cat 5),
•Maximum recommended distance for power: 300'
(using 12VDC, 500mA) •Dimensions (excluding
connector): 1.0" (H) x 0.85" (W) x 2.0" (L)
Sold individually, must be used in pairs
Order # MSRP (1-3) (4-up)
50-7746 $39.95 $22.99 $20.39
Video Accessories
VideoEase™ CCTV Mini Balun
The VideoEase™ CCTV Mini Balun allows a single CCTV video signal to be
transmitted via cost-effective unshielded twisted pair (UTP) cable. Used in pairs, the
CCTV balun eliminates costly and bulky coaxial cable, allowing CCTV security and
surveillance equipment to be connected using standard structured cabling techniques
for neater and more streamlined cabling. The flexible mini coax cable lead allows the
product to fit neatly inside CCTV camera back boxes and dome camera enclosures.
The CCTV balun also works in conjunction with other MuxLab CCTV baluns such as the 500000, 500009 and
500015 for a complete cabling solution. Features and benefits: •Fits inside CCTV dome cameras and back boxes
•Compatible with other MuxLab CCTV baluns •Up to 2200' (670m) via Cat 5 UTP •Cable strain relief
Order # Mfr. # ONLY
33-9760 500023 $29.59
1 x 2 Distribution Amplifier
Provides two video outputs from one
input to split video sources. Dual
power operates on 12VDC or 24VAC.
Includes 12VDC power supply.
Order # ONLY
82-14080 $26.49
BNC Ground
Loop Isolator
This BNC ground loop
isolator reduces ground
loop interference with CCTV signals and can easily
be installed into a new system, or implemented to an
existing one. Useful where a video signal is transmitted
via cable between points with different ground
potentials typically caused by unbalanced power line
loads. Features: •Male to female •Transmits a full
motion monochrome video signal up to 1,900 ft., color
video signal up to 980 ft. •Provides surge protection
Order # ONLY
82-6132 $41.49
Video and Power
Transmission
System
Transmit power and
video signals over
standard UTP Cat
5 cables. The video/
power balun carries
DC power along with
video over standard
UTP cable. The built-
in DC plug on the
video/power balun
at the camera end
(#82-9300) receives
power from the
transmitter (#82-9295). The male BNC to RJ-45 jack
converts 75ohm video to 100ohm video for use with
enconomical UTP Cat 5 cables. To monitor and record
the signals use the four channel video balun (#82-8140)
to break the signal back out. The four channel video
balun converts a single 100ohm RJ-45 single to four
75ohm BNC for transmission over coaxial cable.
Transmits distances up to 1000' for color video
and 2000' for black and white. Using Cat 5e
or greater can increase distances by 20%.
Order # Description MSRP ONLY
82-9295 Video/power transmitter $39.95 $24.99
82-9300 4 UTP to 1 UTP receiver/transmitter 69.95 38.49
82-8140 1 UTP to 4 coax reciever/transmitter 59.95 44.49
Connect
w/CAT5 Cable
To Display
To Camera
#82-9300
#82-9295
#82-8140
Back
Back
Back