User Guide

Need Help? Visit DefenderCameras.com/support
7
SETTING UP YOUR CAMERA
Step 1: Connect to Wi-Fi and Pair Your Camera
1. After powering on your
device, wait 60 seconds for
the LED to ash green before
pairing.
2. Tap + and Scan the QR code
with your camera and follow
the on-screen steps. Please
turn the volume UP on
your phone.
3. When prompted, enter your
Wi-Fi network password.
4. Enter a device password
to protect your camera.
Smith_2.4 GHz
Note: If your mobile device cannot
scan the QR code, tap “Add Serial
Number Manually”
Tip: If you forget your password,
press and hold the Reset button on
your camera to restore the camera to
factory settings.
IMPORTANT: You must be on a 2.4 Ghz
network for your cameras to connect.
IMPORTANT: Before pairing, ensure your phone is connected to a 2.4 Ghz wi network