Owner's manual

3
 Probes
All 6000 probes fall into one of two
categories:
One-point Optimization probes can be
optimized using the One-point
Optimization technique.
Two-point Optimization probes can be
optimized using the Two-point
Optimization technique.
See p.10 for details on Optimization.
 Principles of Operation
F models use the magnetic principle to
measure the thickness of non-
magnetic coatings on ferrous metals.
N models use the eddy current principle
to measure the thickness of non-
conductive coatings on non-ferrous
metals.
FN models combine the full abilities of
both the “F” and “N” models.
 Models
11 = BASIC - mils/microns, FLIP LCDFLIP LCD,
average ZEROZERO and RERESETSET
features.
22 = STANDARD - all BASIC features
plus average, standard deviation,
user adjustable HiLoHiLo limits,
Max/Min thickness by group of
measurements, HI=RESRES, button
LOCKLOCK and user-selectable power-
down times.
33 = MEMORY - all STANDARD features
plus storage & printer/computer
downloading for 5000
measurements.