Owner's manual

21
measurement, standard deviation and
number of readings is printed for each.
Depending upon what MODE was active
when the measurements were taken,
three output types are possible:
REGULAR Mode - all readings are output
STATISTICS Modes - only averages and
standard deviations are output
HILO Mode - all readings are output, each
followed by an indication of which limit
they exceeded.
NOTE: The portable, battery operated,
wireless HP IR printer is available from
your dealer. It provides quick,
convenient, low-cost output in the field,
on the shop floor, or in the lab.
NOTE: The histogram shows a visual
interpretation of the distribution of
readings. The total spread of thickness
is divided into a number of equal
bands. The printout consists of a bar
chart, the length of each bar
corresponding to the number of
readings in that band.