Owner's manual

19
Memory Mode
(Main Menu)
Memory (3) models only
When MEMMEM_ON?ON? is selected the
symbol and a counter (00) appear. 5000
readings in up to 100 batches (groups)
can be recorded.
In MEMORY MODE readings are
simultaneously displayed and stored. The
current BATCH number (B1B1) is displayed.
Remove the last reading from memory by
pressing 88. Erase ALL stored readings by
selecting "CLRCLR MEM?MEM?". Calibration
adjustments cannot be made while in
MEMORY Mode. To turn MEMORY Mode off
select "MEM OFF?MEM OFF?”.
NOTE:: Press 9 at any time for a
summary view of the average,
standard deviation, number of
readings, minimum thickness reading
and maximum thickness reading in the
current batch. Then press 8 or take a
reading to exit the summary view.
 Batch Markers
Readings taken for different jobs or parts
can be grouped together or "separated"
by placing Batch Markers between sets of
measurements. Select B MARK?B MARK? from
the Main Menu after a series of readings.
A Batch Marker is set automatically if you
turn HILO or STATISTICS Modes on or off.
Statistical summaries are calculated for
each batch during downloading.
 Memory AND Statistics Modes
Together
When both these MODES are ON,
individual measurements ARE NOT
STORED. Instead, when 99 is pressed, the