Owner's manual

14
 XRESET
(Config Menu)
Selecting XRESETXRESET returns the gage to
an out-of-the-box condition by performing
a RESET and restoring factory settings.
The XRESETXRESET function makes all of the
same changes as RESETRESET, and also
make the following changes:
• all readings in memory are erased.
• measuring units, power down, button
lock and resolution settings are
restored.
XRESETXRESET is handy when:
• attempting to correct unexpected gage
behavior
• you are uncertain what previous
adjustments have been made and wish
to return the Gage to a known
condition.
FN Combination Probes
FN probes combine the capabilities of
both "F" and "N" probes.
The probe first attempts a measurement
using the magnetic principle. If the
coating is non-magnetic, within the
probe’s thickness range and the substrate
is ferrous, a reading is displayed with the
letter "F".
If no valid reading is obtained with the
magnetic principle the probe
automatically attempts a measurement
using the eddy current principle. If the
coating is non-conductive, within the
probe’s thickness range and the substrate
is a non-ferrous metal, a reading is
displayed with the letter "N".
If a reading is still not obtained, dashes
( -- -- -- -- -- ) appear on the display.