Installation manual

Function 7: Time for Central Locking

Press button B to indicate the current Central locking pulse factor.

1 flash = 1 second pulse

2 flashes = 4 seconds pulse

3 flashes = 0.5 seconds pulse

Press button B again to select the next pulse length, hold button B to select the preceding factor. The

number of confirmation signals indicates the selected pulse factor programmed.

Function 8: Security functions of Central locking

Press button B to indicate the current setting. When this function is selected, it prohibits activation of

the alarm until you have exited the vehicle. This function is intended for vehicles with a locking system

for the Central Locking.

1 flash = Security function not selected (Standard)

2 flashes = Security function selected

Press button B again to select the next function. The number of confirmation signals indicates the

current status.

Function 9: Start lock/Immobilizer

Press button B to indicate the current setting.

Starter kill: The lock function is switched on at the same time as the alarm is armed and is deactivates

as soon as the alarm is switched off again.

Immobilizer: This locking function is activated automatically 30 seconds after the ignition is switched

off and a door is opened. The Immobilizer is deactivated when you switch off the alarm. If you do not

start the car within 30 seconds after opening the doors, the Immobilizer is activated again.

1 flash = Immobilizer is selected (standard on 823)

2 flashes = Starter kill is selected (standard on 821)

Press button B again to select the Immobilizer, hold button B to select the start lock. The number of

confirmation signals indicates the current status.

Function 10: Convenience closing

Switching on the alarm can simultaneously lock the doors and close the sliding roof.

Press button B to indicate the current setting.

1 flash = Function is not selected (standard)

2 flashes = Convenience closing via the original system

3 flashes = Convenience closing via DEFA Power Module, closes only electric window winders

Press button B again to select the next convenience closing mode or hold button B to select the

preceding one. The number of confirmation signals indicates which convenience closing mode is

selected.

Application of function: Hold button A until all elements are closed.

Function 11: Panic function