Datasheet

www.defa.com
DEFA PlugIn Inlet cable
DEFA PlugIn inlet cable consists of a armoured cable with the DEFA
PlugIn contact in one end (A) and the DEFA MiniPlug contact (B) incl.
Cover. An extra earth cable (C) is also tted to the PlugIn end.
The DEFA MiniPlug is suitable for all new vehicles. It is easily ush
mounted to the holder. The DEFA MiniPlug was developed with
functional design, safety, maximum ease of installation and optimum
user-friendliness in mind.
There are two options for installing DEFA MiniPlug:
• Flush in the front or on the bodywork of the vehicle
• Mounted on the holder in existing receptacles on the front of the
vehicle
The enclosed holder can be positioned in several different ways to
facilitate a functional arrangement. Upon request, the contact can be
painted in the colour of the vehicle, thus making it virtually invisible
when ush mounted.
DEFA AS is conforming to the requirements of both ISO 9001-2008,
ISO 14001:2004 and OHSAS 18001:2007. In addition to this, our
engine heaters and cables are conforming to the requirements of ISO/
TS 16949:2002.
CE 060112 - DEFA Inlet cable
A
B
C
D
Technical specications
Voltage [V]
250
Current [A]
16
IP rating
IP44
Weight 1.5 m [gram]
410
Weight 2.0 m [gram]
570
Testing & acceptance
EN 60309-1
EN 60309-2
Item
DEFA number:
460915 Weight: 535 gr. (1,5m ) 22 - pack
460939 Weight: 660 gr. (2,0m) 12 - pack
Part of
Cable kits, DEFA WarmUp and DEFA ComfortKits.
Usage
If at all possible, the inlet cable MiniPlug (B) contact should be mounted so that
the MiniPlug front faces downward at an angle for drainage.
The MiniPlug connector must be installed in a place where it will be protected from
splash water and mechanical damage and so that the DEFA MiniPlug connecting
cable easily can be connected. Fit and install parts according to the enclosed
usage & installation guide.
Maintenance
Apply some silicon spray on the MiniPlug contact terminals under the cover (D)
before and after the season and ensure that either the cable or cover is damaged.
Install a new cable if the cover is damaged.