Specification

Important Notes
1、Before using the unit,please read the relevant matters in the product manual carefully to learn about product precautions and
usage;
2、Open the package,take out the power cord and other accessories,take out the machine,open the side panel to take out the
match filter and tear off the flter bag,then install the filter in place according to the direction indicated;
3、After the filter is installed in place,snap the side panel of the machine and connect the power cord at the bottom of the machine;
4、Plug in the power cord,you will hear a"beep "sound,indicating the successful power-on,at this time the"ON/OFF"button indicator
light;
5、Display panel has a warning sticker,please read the warning notes;
6、Press the"ON/OFF "button to turn on the machine,then the display screen will be on,and the air purifier can be used normally at
this time;
7、If the machine can not start,please focus on checking whether the power cordisconnected,whether the machine side panel
and top cover are in place;
8、If you find that the "flter reading abnormal icon"flashes on the purifier display after power on,you only need to open the side
panel and reinstall the corresponding filter once.Each of our machine has been judged by filter reading before leaving the field,
so if there is abnormal filter reading,it is usually caused by some installation deviation when disassembling and installing the filter;
9、If the filter still cannot be read after repeated installation,please contact the service staff in time;
04