Specification

Ask &Answer
WHY IS THE PURIFIER NOT WORKING?
First,please check whether the power connector at the bottom of
the purifier is plugged in tightly.The power connector will affect the
power-on operation of the purifier when the power connector is
moved or not installed firmly during the first use;Second,check
whether the rear cover of the purifier is well covered and the rear
cover is protected against power failure.If it is not covered properly,
it will work without electricity.
WHY DOES THE ICON OF THE FILTER FLICKER
AFTER POWER-ON?
An E03 icon will appear on the screen.The RFID chip is damaged
and the filter cannot be identified.Please replace the filter with a
new one.
WHY IS THERE A STRANGE SMELL IN THE
AIR OUTLET?
Please confirm whether the purifier has not been turned
on for a long time after use.After the filter has absorbed
a lot of pollutants,it will breed bacteria and cause peculiar
smell after being placed for a period of time.At this time,it
is recommended that you replace the filter to obtain a
normal air purification effect.
WHY IS THERE NO WIND BLOWING FROM
THE PURIFIER AFTER IT IS TURNED ON?
Please check whether the plastic bag of the filter is
removed.
WHY DOES THE VOLUME OF THE AIR PURIFIER
BECOME SMALLER?
The pre-filter will adsorb a lot of large pollutants.After
a lot of pollutants are adsorbed,the resistance increases,
resulting in a decrease in the air volume of the purifier.At
this time,use a vacuum cleaner to suck up the dirt on the
surface of the pre-filter.
21