Specification

Machine Maintenance
△ Before performing the following operations,please pull out the
power plug
① CLEAN THE MACHINE SHELL
Use a soft dry cotton cloth to gently wipe the dust on the surface
of the product,especially at the air inlet and outlet.
Do not use corrosive or volatile or flammable chemicals for cleaning.
The product shell cannot be cleaned with water.
② LASER SENSOR MAINTENANCE
(It is recommended to clean every three months)
1、Openthe sensor cover.
2、Clean the dust and other contaminants on the sensor and outer cover.
3、After cleaning,replace the sensor cover.
Note:
The laser sensor is a key component,please do not disassemble it at
will;using cotton swabs or dry cotton balls as cleaning tools are both
available.
16
CLEAN THE PRELIMINARY FILTER
After adsorbing large particles such as pet hair and lint etc.,the
primary filter will cause its resistance to rise and affect the airflow
of the machine.It is recommended to clean the primary filter once
every month.
Cleaning method:Remove the primary filter from the machine
compartment door,then rinse it with water,air dried and put it
into the machine again.
Except for the primary filter,water washing is prohibited for
other filters.