Specification

Starting Using
Step One:
Open the side cover,take out the flter,and tear off the filter
sealing bag,and then install it back intothemachineseparately;
Step Two:
Take out the power cord,plug the power cord into the connector
at the bottom of the machine,after the power is on,the power
button indicator will light up;
Step Three:
Press the button to turn on the machine,the PM2.5 laser sensor enters
the warm-up state,when the air quality indicator shows yellow by default.
When the PM2.5 laser sensor has finished warming up,the air quality
indicator will show the corresponding color according to the current air
quality.
AIR QUALITY INDICATOR DESCRIPTION
Red:Poor air quality
Orange:Acceptable air quality
Green:Good air quality
Note:
The indicator light only corresponds to changes in the concentration
of particulate matter in the air,and cannot reflect the concentration
of gaseous pollutants.
08