Use and Care Manual

Installation Read Before Use
Programming and features Usage guide
Please install and adjust the washing machine according to the requirement of the
specifications, this is very important for your safety and correctly use the washing
machine.
Please leave ,more than 20 mm between washing machine and the wall, maximum
slope Angle is 2 ° on bearing surface. Ground tilt or uneven may cause washing
machine running unstable or stop in midway, please use the following method to
adjust:
Use a bubble level tool or a free bubble level mobile
phone app to confirm whether the washing machine
is horizontal. If you do not have access to either place
a straw or needle on the machine and see if it rolls.
1. Install in front way
Opened the package, put the washing machine back down
gently on soft surface (such as terry cloth, carpet), Insert the
rat guard from front to back and you can hear a crack click
when it installed in place.Then gently lift it up like the
Picture.
2. Install in back way
Opened the package, put the washing machine back down
gently on soft surface (such as terry cloth, carpet), Insert
the rat guard from back to front and you can hear a crack
click when it installed in place.Then gently lift it up like
the Picture.
loosen
high
low
tighten
adjustable feet
adjustable nut
*The washing capacity means the maximum
weight of washing or spinning for a wash.
*The thickness of the fabric, size or kinds, will
affect the actual washing capacity.
*Do not select high water level when fabric
weight is below 1.0kg
* Please select the high water level when you
believe it is suitable. It will not clean clothes
better if you use a high water level for a small
amount of clothes so please try and save
water.