Instructions / Assembly

TWO-PIECE TOILET
INSTALLATION INSTRUCTIONS
2. Install Closet Bolts 3. Install Wax Ring
Install closet bolts to flange channel, turn 90º
and slide into place 6" (152mm) apart and
parallel to wall.
Invert toilet on floor (use cushion to prevent
damage), and install wax ring evenly around
waste flange, with tapered end of ring
facing toilet.
12”
Closet Flange
Closet Bolts
([phone]
www.deervalleybath.com
-4-
NOTE: Drawings may not exactly define contour of the product.
Wax Ring
5. Install Toilet
Place the tank gasket over the tank nut
ensuring there are not gaps between the
gasket and the tank.
Put the two tank bolts into the tank mounting
holes, then pick up the tank and connect it
after guiding the bolts to align the tank with
the bowl.
Tighten nuts alternately to make them stable
on the toilet bowl.
4. Position Toilet on Flange
Lower the toilet onto the closet bolts, so the
bolts project through mounting holes in base
of toilet.
Rock to press the bowl completely downward
on the wax ring and flange.
Install the washer and nut in sequence, then
alternately tighten the nut until the toilet is
firmly sealed to the floor.
Install the cap.
Cap
Nut
Washer
Bolt
Tank-To-Bowl Gasket