INSTALLATION INSTRUCTION Two-Piece Toilet NOTE: Drawings may not exactly define contour of the product. www.deervalleybath.com | (+1) 312-626-9466 | service@ deervalleybath.
(+1) 312-626-9466 service@deervalleybath.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS Putty Knife Water Supply Kit Wrench Tape Measure Flat Head Screwdriver Level Cross Screwdriver Push button, tank lid, water fitting, soft-close toilet seat, wax ring, bolts kit, bolt covers, installation instruction. The step-by-step guidelines in the installation instructions are a general reference for installing a DeerValley Two-Piece Toilet. Should there be any discrepancies, DeerValley cannot be held liable.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS 1. Remove Old Toilet Turn off the water supply. Flush the toilet to empty the tank. Remove any water left in the tank or bowl. Disconnect the supply line from the tank. Remove decorative caps. Unscrew nuts that attach the toilet to the floor. Remove toilet. Make sure the water supply valve is shut off before installation. Remove old closet bolts from closet flange. Clean any old wax, putty, etc. from base area.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS 2. Install Closet Bolts Install closet bolts to flange channel, turn 90º and slide into place 6" (152mm) apart and parallel to wall. 3. Install Wax Ring Invert toilet on floor (use cushion to prevent damage), and install wax ring evenly around waste flange, with tapered end of ring facing toilet. Closet Flange Wax Ring 12” Closet Bolts 4.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS 6. Install Toilet Seat (1) Open the hinge cover (2) Insert plastic screws into the holes of the hinges (3) Place the seat on bowl, adjust it in perfect position (4) Turn (B) onto (A) all the way up, finish finger-tightening from top (5) Tighten the nut (A) (6) Close the hinge cover NOTE: Drawings may not exactly define contour of the product. -5- (+1) 312-626-9466 www.deervalleybath.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS 7. Install Flush Button Turn plastic nut clockwise to remove it from the lever arm. Insert lever arm through the square hole on the front side of tank. Then screw the plastic nut counterclockwise to tighten it on. Hook chain from flapper to trip lever arm. Leave only enough chain to fully raise the flapper when the trip lever is activated. Leave 5 or 6 extra links at the end of the chain of any future adjustment.
Phone: (+1) 312-626-9466 Address: 2645 Maricopa St Torrance, CA 90503 Email: service@deervalleybath.com Web: www.deervalleybath.com ONE YEAR LIMITED WARRANTY LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.
