Instructions / Assembly

([phone]
www.deervalleybath.com
-6-
NOTE: Drawings may not exactly define contour of the product.
Installation and
Owner’s Manual
Specifications
Rated voltage
Safety device
Surface temperature
Thermal fuse
4 levels adjustable, room temperature about 107°F
120V~ 60Hz
About 1.2m (49 in)Power cord length
Seat
Water supply pressure
About 680 * 390 * 443 mm
(About 26.8 * 15.4 * 17.4 in)
Flush consumption
Rough-in
Flushing mode Siphon jet
1.28Gpf/4.8Lpf
305mm （12.0 in）
Toilet
Rated power
Water supply
temperature
Dimension
Maximum power
Ambient temperature
Waterproof level
Net weight39°F-95°F
63W 70W
37°F-104°F
IPX4
About 34.7kg
(about 76.5 lb)
Minimum necessary dynamic pressure:
23.2Psi (flow rate 20L/Min)
Maximum static pressure: 108.7Psi
Rated power: Set the seat temperature to the highest level under the conditions of an ambient temperature of 68°F±41°F, inlet water
static pressure 26.1Psi ±2.9Psi, Turn on the flush function, and test the average power within 60 seconds.
Maximum power: Set the seat temperature to the highest level under the conditions of an ambient temperature of 73°F±35°F, an
inlet static pressure of 26.1Psi ±2.9Psi, Turn on the flush function and continue to work stably at the maximum power for a cleaning
cycle.
Water consumption test: Test the water consumption separately under the water pressure 23.2Psi and 80Psi three times. Get six
values in total,then divide the sum by six and the average is the nominal water consumption.