Instructions / Assembly

([phone]
www.deervalleybath.com
-19-
NOTE: Drawings may not exactly define contour of the product.
Installation and
Owner’s Manual
Troubleshooting
The toilet seat does not
get warm.
The seat sensor does not sense someone
sitting.
Low seat temperature.
Sit on the toilet seat properly.
Use the side control to adjust seat
temperature.
Phenomenon
The product out of work
Insert the plug or detect the power socket.Whether the power supply is plugged in.
Power outage.
Wait until the power supply restored.
Replace the inlet hose.
Water comes out
unexpectedly from the
inlet hose.
The inlet hose is defect.
Reasons Measures
Taking water to flush.
Check the Angle valve.
Check the Angle valve.
Clean the filter.
Check the water supply.
Flush the toilet again. If the bowl is not
cleaned with a flushing, remove the stains
with a brush or other tools.
Clean the bowl with a non-abrasive toilet
detergent.
Tighten the hose.
Water is leaking from
pipe joints.
The indoor light is too bright.
Please turn off the indoor light and close
the curtain.
The water supply valve is not fully open.
The sewage can not be
flushed away completely.
There is residue on the
bowl unit surface.
Oil and other hard-to -see grime may stick to
the bowl unit surface.
The water supply valve is not fully open.
LED light doesn’t turn
on.
The top unit is unstable.
There is clearance between the toilet seat
cushion and the bowl.
It’s common phenomenon.
Pipe joints keep leaking.
Close the water outlet valve and replace
a new hose.
Pipe joints are loose.
The water supply pressure is weak.
Flushing may be difficult due to the
consistency of the waste material.
The water filter is clogged.
The toilet does not flush.
Water is not available from the water supply.
Notice
When facing an issue, carefully review the common troubleshooting provided above, and follow the solution instructions
for product maintenance. Reach out for assistance by contacting professional maintenance personnel, dealers, or the
DeerValley after-sale service team promptly.
Please be aware that discrepancies may exist between the contents of this manual and the actual product, and in such
cases, the details of the actual product should take precedence.