Instructions / Assembly

([phone]
www.deervalleybath.com
-17-
NOTE: Drawings may not exactly define contour of the product.
Installation and
Owner’s Manual
1. Turn off the power, close the water outlet valve.
2. Use soft cloth to clean the lid and seat.
Be careful not to allow water to get inside or leave detergent in the gap between the top unit and the
bowl unit.
Avoid using materials that will damage the surface. Clean the surface with a soft and wet cloth.
Corrosive chemicals or cosmetics (such as cleaners containing abrasive compounds and aftershave) can
not be used to clean the lid and seat.
3. Turn on the power, open the the water outlet valve.
1. Turn off the power.
2. Use toilet brush and toilet detergent to clean the bowl.
Corrosive chemicals (such as cleaners containing abrasive compounds and strongly acidic cleaners or
strong alkaline cleaners) should not be used to clean the bowl.
Wire brush or abrasive nylon scrubbing brush should not be used to clean the bowl.
3. Turn on the power.
Maintenance and cleaning of the toilet bowl
Maintenance and Cleaning
Maintenance and cleaning of toilet lid and seat
Cleaning The Water Filter
② Remove the water-inflow filter from
the inlet hose.
③ Take out the filter by using a flat-blade
screwdriver to unscrew the filter .
④ Remove the filter and rinse it with
clean water.
⑤ Install the filter screen as it is, be
sure to tighten it, otherwise it will
cause water leakage.
① Turn off the power
Close the water outlet
valve.