Instructions / Assembly

([phone]
www.deervalleybath.com
-15-
NOTE: Drawings may not exactly define contour of the product.
Installation and
Owner’s Manual
Product Installation
5. Connect the water inlet valve and filter
As shown in the following figures.
NOTE:
Do not use the smart toilet immediately after installation, use it after 48 hours.
1. Install the part A water inlet valve.
2. Connect part B and part C to the part
A water inlet valve.
3. Finished, connect to the power.
Inlet angle valve
G3/4
Only connect this product to a properly grounded outlet.
6. Connect to the power
7. Using the product for the first time
Connect to the power and turn on the water inlet valve.
Check every function, such as seat temp adjustment, flushing, etc.