Installation and Owner’s Manual Smart Toilet (DV-1S1059-V1) NOTE: Drawings may not exactly define contour of the product. www.deervalleybath.com | (+1) 312-626-9466 | service@deervalleybath.
(+1) 312-626-9466 service@deervalleybath.
Safety Precautions 02 Component List 05 Specification 06 Function Table 07 Parts Names 08 Product Drawing 09 Power and Water Connection 09 Installation Precaution 10 Product Installation 11 Side Control Using Instructions 16 Other Functions Instruction 16 Cleaning & Maintenance 17 How to do 18 Troubleshooting 19 Maintenance Service Sheet 20
Installation and Owner’s Manual Safety Precautions To prevent damage to the unit and possible injury to users, please follow the safety warnings. Please be sure to carefully read through the user's manual before installation. Keep the user's manual after installation to refer to for troubleshooting advice. Symbols and Meanings WARNING Could result in serious injury or death. The following symbols are used to indicate important safety precautions when using the product. Prohibited.
Installation and Owner’s Manual WARNING It is not allowed to continue using if the product has some breakdown: Product heat abnormally; Product is smoking; Product has abnormal sound and smell; Product is leaking, broken or damaged; Toilet pan is blocked, etc. When the breakdown happens, if it do not handle in time and continue using, it might trigger the problems like electric shock, injury, firing or water penetration inside the room, etc.
Installation and Owner’s Manual WARNING When using in shower room, please install air exchange equipment to ensure the air in the shower room not too moist. This product is electric products, it is not allowed to install it in the place that is easy high wet, easy split by water, otherwise it might trigger electric shock or fire. Please ensure to cut off the electric power before washing this product, do not use water to directly wash this product, otherwise it might trigger the electric shock or fire.
Installation and Owner’s Manual Component List SMART TOILET SEALING RING 15/16-14UNS ADAPTER TEFLON TAPE INLET VALVE USER MANUAL NPT1/2″ G3/4″ USER MANUAL NOTE: Drawings may not exactly define contour of the product. -5- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual Specifications Rated voltage Power cord length Seat Toilet Rated power Water supply temperature Dimension 120V~ 60Hz About 1.2m (49 in) Surface temperature 4 levels adjustable, room temperature about 107°F Flush consumption 1.28Gpf/4.8Lpf Rough-in 305mm（12.0 in） Safety device Thermal fuse Flushing mode 63W 39°F-95°F About 680 * 390 * 443 mm (About 26.8 * 15.4 * 17.
Installation and Owner’s Manual Function Table Category Comfort Human care Safety Function Seat heating Seat ring temperature adjustment ● ● Soft close seat & lip Night light Foot sensor control flush Automatic flush ● ● ● ● Flush with power failure Flushing water pressure Eco mode ● ● Washing in advance Air isolation channel backflow prevention Multi-layers Safety Protection Nano glaze Self diagnosis Preventing Low-Temperature Scalds ● ● ● ● ● ● ● NOTE: Drawings may not exactly define contour of
Installation and Owner’s Manual Parts Names Lid Seat Type-C interface Ceramic toilet Foot sensor or ns se NOTE: Drawings may not exactly define contour of the product. -8- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual Product Drawings About 443mm(17.4 in) About 390mm(15.4 in) About 680mm( 26.8 in) Power and Water Supply Connection Connect to grounded outlet Caution electric shock! GFCI outlet ● If the power cord is not long enough, please use extension line which is made by certificated manufacturers. ● Only for reference. NOTE: Drawings may not exactly define contour of the product. -9- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual Installation Precaution We reserve the right to change, update, modify, alter, redesign this manual and product without prior notice. We shall not be liable for any injuries or property damages in connection with improper installation or use of the product.
Installation and Owner’s Manual Product Installation 1. Install the inlet valve Clean and dry the ground before installation. Mark the draining outlet central lines and install the inlet valve on the wall. Connect to grounded outlet Caution electric shock! GFCI outlet 150mm(5.9 in) ＞500mm（19.7 in） . 1 (1 m m 0 30 n) i 8 Draining outlet 305 mm (12. 0 in ) Central lines 2. Mark the curve of the toilet Align the toilet draining outlet with the central line.
Installation and Owner’s Manual Product Installation 3. Toilet installation(Method 1) ① Sealing ring installation Gently tilt the toilet sideways. Install the sealing ring evenly along the outlet, make sure the small end of the sealing ring face the toilet. Glue the edge of toilet bottom with silicone sealant, place the toilet along the marked outline. Sealing ring Draining hose ② Toilet (ceramic) installation Align the toilet with the outline drawn on the ground, and slowly put it down.
Installation and Owner’s Manual Product Installation 4. Toilet installation(Method 2) ① Remove the bidet seat Remove the fixing screws, disconnect the hoses, then separate the bidet seat from the toilet. Decoration panel Screw Washer Fixed hole ② Sealing ring installation Place the sealing ring onto the flange. Sealing ring Flange NOTE: Drawings may not exactly define contour of the product. -13- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual Product Installation ③ Toilet(ceramic) installation Glue the edge of toilet bottom with silicone sealant Align the toilet with the flange and screws. Place the toilet along the outline and secure the flange bolts. Glue the edge of toilet bottom with silicone sealant. ④ Bidet seat installation Connect the hoses, inset the bidet seat and fix it on the toilet. NOTE: Drawings may not exactly define contour of the product. -14- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual Product Installation 5. Connect the water inlet valve and filter As shown in the following figures. NOTE: Do not use the smart toilet immediately after installation, use it after 48 hours. G3/4 1. Install the part A water inlet valve. 2. Connect part B and part C to the part A water inlet valve. 3. Finished, connect to the power. Inlet angle valve 6. Connect to the power Only connect this product to a properly grounded outlet. 7.
Installation and Owner’s Manual Side Control Using Instructions Photosensitive Sensor Power Indicator Seat Temp Control Button Flush Button USB TPYE-C Seat temp adjustment The seat temperature can be adjusted by shortly pressing the "+" or "-" of the seat temp control button. Flushing The flushing function can be turned on by shortly pressing the flush button. Auto nightlight The auto nightlight function can be turned on or off by long pressing the "-" button under unseated state.
Installation and Owner’s Manual Maintenance and Cleaning Maintenance and cleaning of toilet lid and seat 1. Turn off the power, close the water outlet valve. 2. Use soft cloth to clean the lid and seat. Be careful not to allow water to get inside or leave detergent in the gap between the top unit and the bowl unit. Avoid using materials that will damage the surface. Clean the surface with a soft and wet cloth.
Installation and Owner’s Manual How to Do? USB TYPE-C Interface 1. When the toilet can not flush automatically due to power outage. Connect the smart toilet with power bank through the TPYE-C interface. 2. When the toilet can not flush automatically due to water outage. ① Flush the sewage in the toilet away with basin. ② After flushing, add water to the toilet to avoid stinking. 3.
Installation and Owner’s Manual Troubleshooting Phenomenon The product out of work Water comes out unexpectedly from the inlet hose. Reasons Whether the power supply is plugged in. Insert the plug or detect the power socket. The inlet hose is defect. Replace the inlet hose. Power outage. The seat sensor does not sense someone The toilet seat does not sitting. get warm. Low seat temperature. The toilet does not flush. There is residue on the bowl unit surface. LED light doesn’ t turn on.
Installation and Owner’s Manual Maintenance Service Sheet Product Product code The selling store Province Maintenance content City Purchase date Dealer (signature): Free Maintenance Regulation: 1. We warrant our products to be free from defects in materials and workmanship during normal use when properly installed and serviced, for a period of one (1) year from date of purchase.
Phone: (+1) 312-626-9466 Email: service@deervalleybath.com Web: www.deervalleybath.com ONE YEAR LIMITED WARRANTY LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.
