www.deervalleybath.com | 312-626-9466 | service@deervalleybath.
Before installation, please make sure that the water source is closed and the water supply pipeline is reserved. Please confirm that the installation wall is a load-bearing wall. After completing the installation of heavy objects above 150 kgf, the wall can withstand this tensile force, and make sure that the wall is flat after installation. Please make sure that a qualified professional fallows the steps in this manual to install the pedestal.
1. SUGGESTED TOOLS AND MATERIALS Silicone Pencil Safety Glasses Screwdriver Philips Drill Tape Measure Adjustable Wrench 2. PART LIST Basin, pedestal, bolts kit, installation instruction. 3. USE AND MAINTENANCE Cleaning Neutral cleaner should be used to clean the product. It will damage the surface of the product if use a strong or corrosive cleaner.
. INSTALLATION STEPS STEP 1： Place the basin column at the position where it needs to be installed and then mark the position of the basin's installation hole. High STEP 2： Use a drill to make a hole at the mark on the wall, and then fix the expansion bolt in the installation hole. Install the end of the bolt for the installation basin to the corresponding expansion bolt. Ground STEP 3： After installing the faucet, fix the basin to the bolts which are already installed on the wall.
