Owner Manual

-6-
www.deervalleybath.com
312-626-9466
6. FINAL PLACEMENT
Test fit the sink in the opening that was created in the previous steps. The entire weight of
the sink should be supported by the support frame. Verify that the sink is in line and level
with the top of the cabinet. Use shims, if needed, to level the sink.
Set the sink and apply your sealant to fill in any gaps below the sink front, and between the
sink and counter-top. Hold the sink in place to secure. Place the counter-top onto the sink
and remove any excess sealant from all surfaces.
INSTALLATION INSTRUCTIONS