INSTALLATION INSTRUCTIONS www.deervalleybath.com | 312-626-9466 | support@deervalleybath.
Prior to Installation: Inspect kitchen sink to ensure no damages have occurred while in shipping. Observe all plumbing and building codes in accordance with your state and local requirements. Additional floor and wall preparations may be necessary to avoid damage to the product. Make sure to purchase the correct cabinet for your farmhouse sink. Farmhouse base cabinets should be 3” larger than the actual size of the sink. Installation with laminate countertop not recommended.
INSTALLATION INSTRUCTIONS 1. INSTALLATION OPTIONS We recommend Farmhouse Apron kitchen sink installation. Flushmount, Undermount and Overmount or Drop-In installations are not recommended. Ensure there is adequate room for the faucet and backsplash installations. 2. INSTRUCTIONS Unpack and inspect the sink for any shipping damages and ensure that none of the required pieces are missing. If you find any damages, do not install, please contact us.
INSTALLATION INSTRUCTIONS SUGGESTED TOOLS AND MATERIALS Framing Square Safety Glasses Pencil Tape Measure Level Thread Sealant Wood Shims Wrench Drill Hacksaw Sealant - We recommend the use of a stone, marble and granite silicone caulk or a general purpose silicone sealant. 3. DIMENSIONS 3 1/2” 3 1/2” 10” 10” 23 3/4” 30” DV-1K016 30”X 19 13/16”X 10” DV-1K022 23 3/4”X 18”X 10” -3- 312-626-9466 www.deervalleybath.
INSTALLATION INSTRUCTIONS 3 1/2” 3 1/2” 3 1/2” 10” 10” 33 3/8” 30” DV-1K026 DV-1K028 30”X 18”X 10” 33 3/8”X 18”X 10” 3 1/2” 3 1/2” 10” 7 11/16” 22 5/8” 33” DV-1K116 DV-1K119 23 3/4”X 15 13/16”X 7 11/16” 33”X 19 11/16”X 10” -4- 312-626-9466 www.deervalleybath.
INSTALLATION INSTRUCTIONS 4. PREPARE THE CABINET Farmhouse sink may require custom cabinetry. We recommend consulting an experienced cabinet maker for assistance. Providing the cabinet maker with the actual sink that is to be installed will ensure a custom fit. Allow clearance for the water supply lines, drains and a garbage disposal, if applicable. Build a support frame or install support bars from front to back along the inner sides of the cabinet.
INSTALLATION INSTRUCTIONS 6. FINAL PLACEMENT Test fit the sink in the opening that was created in the previous steps. The entire weight of the sink should be supported by the support frame. Verify that the sink is in line and level with the top of the cabinet. Use shims, if needed, to level the sink. Set the sink and apply your sealant to fill in any gaps below the sink front, and between the sink and counter-top. Hold the sink in place to secure.
INSTALLATION INSTRUCTIONS 7. STRAINER INSTALLATION GUIDE Step 1: Taking apart the sink strainer, put the upper strainer body and white gasket into the sink hole. Step 2: Put the lower strainer and black gasket connect to the upper part under the sink. Step 3: Fix the upper and lower parts with screws. Step 4: Connect the drain tail piece. Step 5: Connect the trap. Run water and check for leaks. Step 6: Insert the basket.
DeerValley ® Phone: 312-626-9466 Address: 2645 Maricopa St T。rrance, CA 90503 Email: support@deervalleybath.com Web: www.deervalleybath.c。m 。 DeerValley products are made with quality materials and excellent craftsmanship t provide the customers a l ng-lasting product.
