Installation Guide

Measure the hole for the sink: Turn the sink upside down and trace the outline directly on
the countertop with a pencil. The outline will be slightly larger than the sink’s opening,
so make a second outline about 1/2 inch smaller than the original for the hole.
Fasten the mounting brackets loosely into the pre-drilled mounting holes in the countertop.
Apply silicone caulk (not included) evenly all around the top of the sink flanges. Position
and align the sink under the countertop opening. Press the silicone and flange up onto
the countertop.
Installation tools are not provided, please prepare by yourself.
Sealant - We recommend the use of a stone, marble and granite silicone caulk or a general
purpose silicone sealant.
Thread Sealant
Framing Square Safety Glasses Pencil Tape Measure Level
Wood Shims Basin Wernch Drill Hacksaw
([phone]
www.deervalleybath.com