Instructions / Assembly

2. Install Closet Bolts 3. Install Wax Ring
Install closet bolts to flange channel, turn 90º
and slide into place 6" (152mm) apart and
parallel to wall.
Invert toilet on floor (use cushion to prevent
damage), and install wax ring evenly around
waste flange, with tapered end of ring
facing toilet.
12”
Closet Flange
Closet Bolts
([phone]
www.deervalleybath.com
-4-
NOTE: Drawings may not exactly define contour of the product.
Wax Ring
5. Install Toilet
Pre-install the side cover and hook, then use
a flat head screwdriver to tighten the side
covers and finally place the caps to hide
installation holes on toilet.
Connect the flexible water supply line
(not included) to the shut-off valve and
perform a flush test to check for leaks.
Bolt Covers
Use a Flat Head Screwdriver to tighten the side covers.
Cap
Screw
Side Cover
Hook
4. Position Toilet on Flange
Lower the toilet onto the closet bolts, so the
bolts project through mounting holes in base
of toilet.
Rock to press the bowl completely downward
on the wax ring and flange.
Install the washer and nut in sequence, then
alternately tighten the nut until the toilet is
firmly sealed to the floor.
Install the cap.
Cap
Nut
Washer
Bolt