Console Sink www.deervalleybath.com | (+1) 312-626-9466 | service@deervalleybath.
Before installation, please make sure that the water source is closed and the water supply pipeline is reserved. Please confirm that the installation wall is a load-bearing wall. After completing the installation of heavy objects above 150 kgf, the wall can withstand this tensile force, and make sure that the wall is flat after installation. Please make sure that a qualified professional fallows the steps in this manual to install the pedestal.
INSTRUCTIONS (1) SUGGESTED TOOLS AND MATERIALS Silicone Screwdriver Philips Safety Glasses Drill Pencil Tape Measure Adjustable Wrench Level Installation tools are not provided, please prepare by yourself. (2) Console Sink&Legs i Style may vary i Not included (+1) 312-626-9466 www.deervalleybath.
Parts Included: x2 x2 x4 x2 x2 x4 x2 x2 x2 x2 x2 (3) USE AND MAINTENANCE Cleaning Warning Neutral cleaner should be used to clean the product. It will damage the surface of the product if use a strong or corrosive cleaner. Corrosive Neutral cleaner Strong Use cleaner cleaner Do not use nylon brush or cloth to clean products, so as not to abrade the surface of the product. Please clean the washbasin with a soft cloth, after each use.
(4) INSTALLATION STEPS NOTE: These fixings are suitable for solid walls only. Plasterboard or stud walls may require specialist fixings (not supplied). CAUTION: Take care when drilling walls and floors to avoid any concealed wires or pipes. Before Installation : 1. Prior the installation, unpack your product and inspectit keep the product in its original package until you are ready to install it; 2.Shut the water supply off when replacing an existing fixture.
STEP 1： Drill two holes in the requied position on the wall using a 14mm masonry drill bit ,to depth of 75mm. STEP 2： Push a wall plug into each hole. STEP 3： Screw a fixing bolt into each fixing plug using an 8mm spanner until the spanner contacts the wall. STEP 4： Place the basin in position against the wall.Locating the fixing bolts through the holes in the rear of the basin. Push a plastic washer followed by a metal washer, onto each fixing bolt.
(3) Install Console Secure your console underneath the sink and to the wall. NOTE: Solder lug washer may need to be adjusted to properly align your console legs with the sink. (4) Seal Sink Apply a bead of caulk around the back edge of the sink where it meets the wall. (5) Install Plumbing Fixtures 6 (+1) 312-626-9466 www.deervalleybath.
Phone: (+1) 312-626-9466 Address: 2645 Maricopa St Torrance, CA 90503 Email: service@deervalleybath.com Web: www.deervalleybath.com ONE YEAR LIMITED WARRANTY LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.
