TractorPlus™ Smart Connector Kit BRE10565 INSTALLATION INSTRUCTIONS R572967 22SEP20 (ENGLISH) 7000/7010, 8000/8010/8020, 8000T/8010T/8020T, 9000/9020, and 9000T/9020T Series Tractors John Deere Waterloo Works R572967 (22SEP20) PRINTED IN U.S.A. COPYRIGHT © 2020 DEERE & COMPANY Moline, Illinois All rights reserved.
BRE10565 Introduction allows visibility of data from the vehicle data network. Operator must have the TractorPlus™ App in order to view module signals. IMPORTANT: Read through this instruction thoroughly and familiarize yourself with the machine before installing parts. This instruction demonstrates procedures for installing the TractorPlus™ Smart Connector Kit.
BRE10565 Carefully read all safety messages in this instruction. Read the product operators manual for operating instructions and safety messages. Do not let anyone operate without instruction. (A copy of the operators manual may also be available from the Service ADVISOR™ application.
BRE10565 Regulatory and Compliance Information a minimum distance of 20 cm (8 in) between the radiator and persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. United States—Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
BRE10565 Product Specifications Product Specifications Product Rating Minimum Typical Voltage 9 V 12 V 16 V Current - - 10 A Frequency Band (Max EIRP +8 dBm) 2402 MHz - 2480 MHz Operating Temperature -40° C - 85° C Dust Seal Integrity IP-6X Immersion Sealing Integrity IP-X7 Maximum KB78086,0001601 -19-11SEP20-1/1 Install Bluetooth Module—7000/7010 Series 1. Disconnect the negative (-) battery terminal. 2.
BRE10565 3. Connect Bluetooth module (A) to wiring harness (B). B—Wiring Harness RXA0179739 —UN—15SEP20 A—Bluetooth Module KB78086,00015FC -19-22SEP20-2/3 5. Retain the Bluetooth module and associated wiring harnesses neatly under the console using the provided tie bands. (Keep the connectors accessible for future use.) 6. Reinstall the previously removed panels and reconnect the negative (-) battery terminal.
BRE10565 RXA0179504 —UN—01SEP20 RXA0179503 —UN—01SEP20 Install Bluetooth Module—8000/8010/8020, 8000T/8010T/8020T, 9000/9020, and 9000T/9020T Series Tractors 8000/8010/8020 and 8000T/8010T/8020T Series Fuse Panel 1. Disconnect negative (-) battery terminal. 2. Remove screw (A) and panel (B). Open fuse panel (C). A—Screw B—Panel RXA0179508 —UN—01SEP20 3.
BRE10565 4. Connect Bluetooth module (A) to wiring harness (B).
8000/8010/8020 and 8000T/8010T/8020T Series Fuse Panel RXA0179509 —UN—01SEP20 RXA0179505 —UN—01SEP20 BRE10565 9000/9020 and 9000T/9020T Series Fuse Panel IMPORTANT: Locate diagnostic connector (A) at the fuse panel. Route the connector so that it is accessible in the area behind the control panel. 6. Retain the Bluetooth module and associated wiring harnesses neatly under the console using the provided tie bands. (Keep the connectors accessible for future use.) 7.
BRE10565 R572967 (22SEP20) 9 092320 PN=11
BRE10565 R572967 (22SEP20) 10 092320 PN=12
