Operation Manual

ManualsBrandsDEEPTRACK ManualsComputers & AccessoriesWireless device for control and data acquisition

This document and the information in it are provided in confidence, for the sole purpose of exploring business opportunities between the disclosing party and the

receiving party. Confidential document. It is not allowed to reproduce or disclose partial or totally the information contained in it, except by express written consent of

Deeptrack.

DPT-EG-MAN-DBR31-MANDBR2-001-A5 Technical Manual

7. Led interface

Several LEDs are used to indicate the status of the board. All the LEDs are programmable, except LED “PWR” which is

directly connected to the power supply.

Signals:

• Power on

• RF - RF activity

• DRV - Driver enabled

• ACT - Program running

• ERR - Error/Emergency

reporting

8. SPI Bus connector

Serial Peripheral Interface. Connector PTSM 0,5/ 6-HV-2,5

Signals:

• S1

• S0

• SCK

• nCS

• GND

• 3V3

9. NFC interface

The board includes a 64-Kbit EEPROM for the NFC memory allowing faster data transfer between the NFC (I2C

communication) and the RF interface (NFC tag writer is recommended).

Write time:

• From I2C: typical 5ms for 1 byte

• From RF: typical 5ms for 1 block

10. Capacitive buttons

Used to interact with a human user.