Operation Manual

ManualsBrandsDEEPTRACK ManualsComputers & AccessoriesWireless device for control and data acquisition

This document and the information in it are provided in confidence, for the sole purpose of exploring business opportunities between the disclosing party and the

receiving party. Confidential document. It is not allowed to reproduce or disclose partial or totally the information contained in it, except by express written consent of

Deeptrack.

DPT-EG-MAN-DBR31-MANDBR2-001-A5 Technical Manual

3. Power and motor drive connector

Power supply input and SSR outputs. Connector SPT 2.5/4-V-5.0. Connector SPT 2.5/4-V-5.0.

The board must be 24VDC powered. Located in the same connector are the outputs for motor driver (M1 and M2),

24VDC, up to 15A.

Signals:

• 24V

• GND

• M1

• M2

4. ISO RS485 Connector

Isolated RS485 interface. Connector PTSM 0,5/ 3-HV-2,5.

For devices which does not need power from the board and are powered from another voltage source

Signals:

• ISO B

• GND

• ISO A

5. RS485 Connector

RS485 interface. Connector PTSM 0,5/ 5-HV-2,5.

For devices which can be 24VDC powered from the board.

Signals:

• NIC

• RS485 B

• RS485 A

• GND

• 24V

6. Digital IO connector

Digital IO, 2 isolated inputs, 1 SSR output. Connector PTSM 0,5/ 5-HV-2,5.

Signals:

• IN 1

• IN 2

• Input ref

• OUT SSR

• GND