Operation Manual

This document and the information in it are provided in confidence, for the sole purpose of exploring business opportunities between the disclosing party and the
receiving party. Confidential document. It is not allowed to reproduce or disclose partial or totally the information contained in it, except by express written consent of
Deeptrack.
© DEEPTRACK | 2020
DPT-EG-MAN-DBR31-TECMAN-001-A3 Technical Manual
6. RS485 connector (B6): RS485 interface. Connector PTSM 0,5/ 3-HV-2,5.
For devices which does not need power from the board and are powered from another voltage source.
Signals:
o P
o GND
o N
7. RS485 connector (B4/B5): RS485 interfaces. Connectors PTSM 0,5/ 5-HV-2,5. For devices which can be 24VDC
powered from the board.
Signals:
o 24V
o GND
o P (D+)
o N (D-)
o PE
8. Digital IO connector: Digital IO, 2 inputs, 1 SSR output. Connector PTSM 0,5/ 5-HV-2,5.
Signals:
o IN1
o IN2
o Input ref
o OUT SSR
o GND
9. Led interface: Several LEDs used to indicate the status of the board.
All the LEDs are programmable, except LED “PWR” which is directly connected to the power supply.
Signals (usually used as):
o PWR (Power on)
o ACT - Program running
o DRV - Driver enabled
o RF - RF activity
o ERR - Error reporting
10. SPI Bus connector: Serial Peripheral Interface. Connector PTSM 0,5/ 6-HV-2,5