User's Manual
Table Of Contents
- 1. Warning:
- 2. Charger Interface:
- 3. Display Diagram:
- 4. Function and Reset Buttons:
- 5. Power Supply:
- 6. Exploring the Simple Mode Interface of the Software
- 7. Add the Charger to Your WiFi Network, Using Your Laptop/PC
- 8. Add the Charger to Your WiFi Network, Using the WPS Method
- 9. Add a Charger and Set-Up.
9. ADD A CHARGER
AND SET-UP.
First connect your device to the
laptop/PC.
The device and the laptop/pc
must be connected to the same
internet network.
In the software interface click on the
gear icon, and on the McM
configuration page select Charger
settings tab.
Click on the scan button, and when the
select to range scan window appears, select an ip range for the software to scan, and click
on the scan button.
MEGACELL CHARGER 13