User's Manual
Table Of Contents
- 1. Warning:
- 2. Charger Interface:
- 3. Display Diagram:
- 4. Function and Reset Buttons:
- 5. Power Supply:
- 6. Exploring the Simple Mode Interface of the Software
- 7. Add the Charger to Your WiFi Network, Using Your Laptop/PC
- 8. Add the Charger to Your WiFi Network, Using the WPS Method
- 9. Add a Charger and Set-Up.
Select the access point name from your Laptop/PC WiFi search tab and enter the password.
After you have inserted the password
shown on your MegaCell Charger you
should be redirected to the WiFi
configuration Page. If for some reason
you don’t get there, manually type the IP
192.168.4.1 into your browser to get to
the WiFi manager Page.
Click on the Configure WiFi button, and after this click on scan to see the available networks.
Select the id, add the password and click the save button.
The charger is now connected to your WiFi network.
MEGACELL CHARGER 11