User's Manual

Operation 53
Operation
4
6 Press [View the places with map]. A list of
set maps will appear.
,
Note
y Press [ ] (Previous) to move back to the
previous screen.
7 Select the map of the UV processing
target space from the map list.
The selected map will appear.
,
Note
y Press [ ] (Previous) to move back to the
previous screen.
8 Position the robot close to the starting
point (within 1 meter).
9 Once you position the robot, the spot is
marked on the map. Select the robot’s
current position on the map.
The robot’s current position will be reset.
,
Note
y Press [ ] (Previous) to move back to the
previous screen.