User guide

Attach the angle brace [M] to the bottom of the MIDDLE and REAR mounting bracket
through the slot shown in the anglel brace using a hex head bolt [G], washer [H], and a nut [I].
Tighten with a 7/16" socket/wrench.
Attach the frame brace [N] to the bottom of the middle and rear angle brace
through the slot shown in the angle brace using a hex head bolt [G], washer [H], and a nut [I].
With the frame brace held up against the frame, tighten the hardware with a 7/16" socket/wrench.
8
9
FX 27944 6 OF 9 4/12/2012