User guide

1999 -2007 Driver Side Rear Brace
Place the left mounting bracket [E] up to the sub-box support and attach using the factory bolt
previously removed.
Place a 3/8 x 1 1/4" hex head bolt [N] and 3/8" washer [O] up through the other hole in the mounting
bracket and thread into the 3/8" threaded plate [P].
Tighten the factory bolt using an 18mm socket. Tighten the 3/8" bolt using a 9/16" wrench or socket.
FX 12958 7 OF 17 6/1/2011