User guide

1999 -2007 Driver Side Front Brace (continued)
Place the support bracket [G] into the sub-box support.
Attach the support bracket to the sub-floor support using a 1/4 x 1 1/4" hex head bolt [Q] and a 1/4"
fender washer [R] where shown in the photo on the right.
Attach the LH running board brace [E] using the factory bolt previously removed
and a 1/4 x 1 1/4" hex head bolt [Q] and a 1/4" fender washer [R].
and a 1/4 x 1 1/4" hex head bolt [Q] and a 1/4" fender washer [R].
Tighten the factory bolt using an 18mm socket. Tighten the 1/4" bolts using a 7/16" wrench or socket.
FX 12958 5 OF 17 6/1/2011