User guide

Page 1 of 3 6/4/08 (AM)

PARTS LIST:

Bull Bar

12-1.75mm x 30mm Bolt Plates

Driver/Left Mounting Bracket

12-1.75mm x 140mm Hex Head Bolts

Passenger/Right Mounting Bracket

12-1.75mm x 35mm Hex Head Bolts

Square Washers

12mm Lock Washers

12mm Hex Nuts

12mm ID x 29mm OD x 3mm Flat Washers

INSTALLATION INSTRUCTIONS

3” BULL BAR

99-04 F-150/250LD 2WD

P A R T #

Passenger Side

Mounting Bracket

Driver Side

Mounting Bracket

Bolt Plates

(2 pcs)

Square Washer

(2 pcs)

PAGE 1
INSTALLATION INSTRUCTIONS 3” BULL BAR 99-04 F-150/250LD 2WD PART # PARTS LIST: 1 1 1 2 Bull Bar Driver/Left Mounting Bracket Passenger/Right Mounting Bracket Square Washers Passenger Side Mounting Bracket 2 2 4 8 8 14 12-1.75mm x 30mm Bolt Plates 12-1.75mm x 140mm Hex Head Bolts 12-1.
PAGE 2
PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION 2. NOTE: It may be necessary to remove/relocate front license plate and license plate bracket. It is not required, but strongly recommended. If local/state law requires a license plate, license plate relocation kit is available. 3. NOTE: Cutting the bottom of bumper is necessary if vehicles are not equipped with tow hooks. Vehicles with Tow Hooks Instructions 4.
PAGE 3
(Driver Side Installation Without Tow Hooks Shown) Fig 1 Fig 2 12mm x 140mm Hex Bolt 12mm Lock Washer 12mm Flat Washers 12mm Hex Nut 12mm x 140mm Hex Bolt 12mm Square Washer Fig 3 Fig 5 (Bolt plate) 12mm Lock Washer 12mm Flat Washers 12mm Hex Nut Fig 4 12mm x 35mm Hex Bolts 12mm Lock Washers 12mm Flat Washers 12mm Hex Nuts Page 3 of 3 Fig 6 6/4/08 (AM)