(W) INSTALLATION INSTRUCTIONS GRILLE GUARD 94-01 1500 DODGE RAM 94-02 2500-3500 DODGE RAM Part # 500214/ 500215
GRILLE GUARD 94-01 1500 DODGE RAM 94-02 2500-3500 DODGE RAM PARTS LIST: 1 2 2 2 2 2 2 Grille Guard Top Clamp Brackets Bottom Brackets Spacer Plates 12-1.75mm x 120mm Hex Bolts 12mm Lock Washers 12mm x 37mm OD x 3mm Flat Washers 2 2 4 4 4 4 10-1.5mm x 40mm Hex Bolts 10-1.5mm x 30mm Hex Bolts 10mm x 30mm OD x 2.5mm Large Flat Washers 10mm x 20mm OD x 2mm STD Flat Washers 10mm Lock Washers 10mm Hex Nuts PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
GRILLE GUARD 94-01 1500 DODGE RAM 94-02 2500-3500 DODGE RAM To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be used also to clean the Grille Guard.
GRILLE GUARD 94-01 1500 DODGE RAM 94-02 2500-3500 DODGE RAM Hook the Top Clamp onto the steel inner bumper and the plastic cover 10mm x 40mm Hex Bolt (2) 10mm x 20mm OD STD Flat Washers 10mm Lock Washers 10mm Hex Nut Front inner bumper and plastic cover Top Clamp Front Edge cover to protect bumper Spacer Plate 10mm x 30mm Hex Bolt (2) 10mm x 30mm OD Large Flat Washers 10mm Lock Washers 10mm Hex Nut Figure 3 Bottom Bracket Replace factory body bolt with: 12mm x 120mm Hex Bolt 12mm Flat Washer 12mm Lo