(W) INSTALLATION INSTRUCTIONS 4" OVAL SIDEBARS BODY BOLT MOUNT 2014 SILVERADO/SIERRA 1500 DOUBLE CAB PART # DZ 372527/ DZ 372529
4" OVAL SIDEBARS BODY BOLT MOUNT 2014 SILVERADO/SIERRA 1500 DOUBLE CAB PARTS LIST: Qty 1 1 1 1 2 1 1 Description Driver/Left Sidebar Passenger/Right Sidebar Driver/Left Front Mounting Bracket Passenger/Right Front Mounting Bracket Center Brackets (left or right) Driver/Left Rear Mounting Bracket Passenger/Right Rear Mounting Bracket Qty 4 4 4 2 2 2 Passenger/Right rear Mounting Bracket Description 1/2” x 2” Hex Bolts 1/2” Lock Washers 1/2” x 1-1/2" OD x 1/8" Flat Washers 8-1.
4" OVAL SIDEBARS BODY BOLT MOUNT 2014 SILVERADO/SIERRA 1500 DOUBLE CAB 7. Level and adjust the Sidebar, tighten all hardware and check all mounting locations for clearance between factory steel body mount brackets and Mounting Brackets. Once satisfied with fit, tighten all hardware. 8. Repeat Steps 1 - 7 for driver Sidebar installation. 9. Do periodic inspections to the installation to make sure that all hardware is secure and tight. To protect your investment, wax this product after installing.
" OVAL SIDEBARS BODY BOLT MOUNT 2014 SILVERADO/SIERRA 1500 DOUBLE CAB Factory body bolt 1/2” x 2” Hex Bolt 1/2” Lock Washer 1/2” Flat Washer Factory body bolt 1/2” x 2” Hex Bolt 1/2” Lock Washer 1/2” Flat Washer Front Fig 4 Rear Factory body bolt Rear (Fig 5) Driver side Rear Bracket installation pictured 8mm x 25mm Hex Bolt 8mm Lock Washer 8mm Flat Washer (Fig 6) Passenger side Center Bracket pictured Complete Installation Page 3 of 3 9-4-13 (DP)