(W) INSTALLATION INSTRUCTIONS 3" ROUND & 4" OVAL SIDEBAR (90-DEG BENT END) 09-12 DODGE RAM 1500 CREW CAB 10-12 DODGE RAM 25-3500 CREW CAB PART #DZ 372251/DZ 372252/DZ 372253
3" ROUND & 4" OVAL SIDEBAR 09-12 DODGE RAM 1500 CREW CAB 10-12 DODGE RAM 25-3500 CREW CAB PARTS LIST: Qty 1 1 1 1 1 1 1 1 4 4 Description Driver/Left Sidebar Passenger/Right Sidebar Driver/Left Front Mounting Bracket Passenger/Right Front Mounting Bracket Driver/Left Front Support Bracket Passenger/Right Front Support Bracket Driver/Left Rear Mounting Bracket Passenger/Right Rear Mounting Bracket 1/2” x 2” Hex Bolts 1/2” Lock Washers Passenger Side Rear Mounting Bracket Passenger Side Front Mounting Brac
" ROUND & 4" OVAL SIDEBAR 09-12 DODGE RAM 1500 CREW CAB 10-12 DODGE RAM 25-3500 CREW CAB 6. Remove the passenger side front factory body bolt. Select the passenger side Front Support Bracket. Insert the factory body bolt through the Support Bracket and up into its original position, (Figure 2). Line the other end of the Support Bracket up with the oval hole in the Front Mounting Bracket. Snug but do not tighten hardware at this time. 7.
3" ROUND & 4" OVAL SIDEBAR 09-12 DODGE RAM 1500 CREW CAB 10-12 DODGE RAM 25-3500 CREW CAB PASSENGER SIDE INSTALLATION PICTURED Factory body bolt (1) Bolt and Nut Plate (2) 12mm Hex Nut (2) 12mm Lock Washer (2) 12mm Flat Washer (1) 10mm x 35mm Hex Bolt (1) 10mm Lock Washer (1) 10mm Flat Washer Fig 1C Rear Fig 2 (1) 10mm x 35mm Hex Bolt (1) 10mm Lock Washer (1) 10mm Flat Washer Front (1) Bolt and Nut Plate (2) 12mm Hex Nut (2) 12mm Lock Washer (2) 12mm Flat Washer (Fig 3) Rotate Bolt and Nut plate to l
