Data Sheet

35
10.35" (263 mm)
2.84"
(72 mm)
1.98" (50,4 mm)
10.35" (263 mm)
2.84"
(72 mm)
1.98" (50,4 mm)
NEW: HIGH TECH NOISELESS MOSFET DIMMERS
- ALSO WITH DMX
DLDIM2000 with integrated DMX control
This dimmer can control many dedolight
tungsten focusing and soft lights along with
lights of other manufacturers up to 2 kW at
230 - 240 V or up to 1 kW at 100 -120 V.
Since these DMX - controlled dimmers are
noiseless, they can be mounted next to the light.
Mounting devices for attaching to pipes via
clamps are available. As a result, many studios
will be able to eliminate external dimmers which
DLDIM2000-DMX
120 V max. 1 kW
DLDIM2000
often generate noise and require a room of
their own. Our high tech dimmers bridge the
missing gap of DMX for all halogen studio
lights.
150 W light head with
light output similar to
traditional 500 W Fresnels
(DLHM4-300DMX)
Recognition of defective or missing lamp
(blink code with LED indicator)
Short circuit and overload protection
Smooth dimming range 3-100 %
Robust and small housing
Low voltage cutoff at 10.2 V respectively
20.4 V for protection of batteries
When input voltage is lower than 12 V
the maximum output (100 %) cannot be
reached. Similarly, in 24 V mode the
maximum is not possible when the input
is below 24 V
Tech Specs: DLDIM-BAT Inline Dimmer
Switch the voltage selector to the 12 V
- DC position - Now you can feed up to
18 V, but the maximum output voltage is
limited to 11.8 V. This is suitable for 12 V
- 20, 50, 75 and 100 W lamps.
Switch the voltage selector to the 24 V
- DC position - Now you can feed up to
36 V, but the maximum output voltage is
limited to 23.5 V. This is suitable for 24 V
- 50, 100 and 150 W lamps.
The lamps will be gently started (soft start)
when switched on.
The Classic dedolights work with 12 V and /
or 24 V special low voltage lamps. These
lamps offer the following advantages:
extreme high light output for a halogen
system with 40 lumen per Watt (standard
high voltage halogen lamps only provide
approximately 20 lumen per Watt)
resistant to shock and vibration (which
is definitely not a virtue of high voltage
halogen lamps)
drastically lower purchase cost (75 % less)
longer life expectancy
BUT: All halogen lamps which offer very
high light outputs are sensitive to over
voltage.
12/24 V In-line Dimmer
The dedolight DLH400DT daylight fixture, with its DEB400DT ballast is also available with DMX control.
Our new 1200 W daylight source (DLH1200D) and DEB1200D ballast are equipped with integrated DMX control as a standard.
1000 W pole operated light
head (DLH1000TPO-DMX)
650 W pole operated light
head (DLH650PO-DMX)
In studios you will find that the moving
lights are always DMX controlled. Most
Kinoflo lights can be DMX controlled.
Other focusing lights are usually not DMX
controllable. This is one of the reasons
why our dedolight 150 W DMX
controllable light heads (DLHM4300DMX)
which offer a light output similar to a
traditional 500 W Fresnel, are used in
many TV studios.Also our daylight light
heads are DMX controllable.
dedolights with integrated DMX-dimmers
Working with batteries, over voltage can occur quite frequently. As an example - professional video camera
batteries which are nominally called 12 V batteries are no longer true 12 V versions but mostly 14.4 V - and
when they are freshly charged they provide up to 17 V. The DLDIM-BAT dimmer solves this problem.
DLDIM-BAT