Data Sheet
3
CRI Ra (1-8) 97
CRI Ra‘ (1-14) 96
CCT 3112K
R1 R2 R3 R4 R5 R6 R7 R8
98 98 95 97 96 95 98 96
R9 R10 R11 R12 R13 R14 R15
89 92 96 95 98 96 89
Digital cameras see LED light differently than 
tungsten/daylight sources. Additionally cameras 
interpret these light sources differently from each 
other. Color temperature meters are unable to 
see the full spectrum and therefore do not work 
for the evaluation of LED light. Samples are only 
taken in three or four places of the spectrum 
(narrow band filters). Spectrum analysis and CRI 
values offer a serious step for evaluation, but 
usually do not include colors called R9, which 
is a very important and critical red value, and 
R13 - skin tone. Even expanded CRI evaluations 
do not offer reliable criteria.
TLCI (Television Lighting Consistency Index), the 
new standard of the European Broadcasting 
Union (EBU), offers a better and more reliable 
base for the way studio cameras see LED light. 
These studio cameras usually work with three 
CCD sensors. Thus, the results are not really 
indicative for the way different CMOS cameras 
see LED color. Only practical tests with many 
different cameras and shooting different skin 
tones in reference light comparisons bring us 
closer to the target.
dedocolor
dedocolor finally offers values and properties 
which bring us very close to the target, even 
under critical conditions, and even in most 
mixed light situations.
LED BREAKTHROUGH
Expanded spectrum analysis
Measurements with our 40 W DLED4.1 bicolor light in tungsten function.
Values gained from expanded CRI measurements with our 40 W DLED4.1 bicolor light in tungsten function.
NEW: 
FELLONI2 
Our multi-LED panels - the FELLONIs - are now available in FELLONI2 
version with distinctly enhanced light output, without increasing power 
consumption. This leads to a noticeable increase in light efficiency.
Compared to other very well-known multi-LED panel lights, 
the FELLONI2 has 180 % efficiency.
dedocolor FELLONI
The dedocolor FELLONI are multi-LED panels with the highest color quality 
(CRI approx. 95). These LED panels will have the high light output and 
efficiency of the traditional FELLONI’s, but with optimum color quality. 
This will be a variant at prices about 25% higher than the traditional 
FELLONI. 










