Data Sheet

9
DLOBML- XLR
DLOBML- CAR
DLOBML- AB-S
DLBCA-V
DLPS12-30
Mains power unit with connector set
EU, USA, AUS, UK
If needed, the power feed between
ballast and AC adapter DLPS12-30
can be elongated by extension cable
DLPS12 - EXT (length 8‘ / 250 cm)
Imager / projection attachment with
adjustable blades
Imager / projection attachment for Gobos
and background effect filters
Dimmable monochrome ballast for
DLED2.1Y-D/DLED2.1YHSM-D
Dimming with no color change.
Input: 6 – 18 V DC
Dimmable bicolor ballast for
DLED2.1Y - BI / DLED2.1YHSM - BI
Dimming and continuous change of color
temperature from 2800 to 6000K.
Input: 6 – 18 V DC
DP2S
DP1S
DT2.1-BI-BAT
DT2.1-BAT
DLED2POW0.55
Connecting cable to light head,
2‘ (55 cm) long
DLED2POW1.4
Connecting cable to light head,
5‘ (140 cm) long
DLED2POW3
Connecting cable to light head,
10‘ (300 cm) long
Note:
LiTH 95Wh battery with integrated
charger and V - Mount adapter can be
used on a belt and also hung on the knob
of a stand (loop). This device also serves
to feed DLED4.1 in all its various versions
(see following pages).
V - lock mount
14.8 V 95 Wh
Max. discharge rate up to 10 A
Input voltage for charger 90 V - 240 V
(Including charge cable. Specify power
plug needed for your country.)
Integrated charger
Compatible with all V- mount plates
5- pin connector allows communication
for camera and all other V - lock equipment
LiTH 95SI battery, 95 Wh
V - Mount plate with belt clip or belt loop
and D - tap output.
THREE SIZES OF CONNECTING
CABLE TO LIGHT HEAD
(yoke versions)
DLOBML- AB-L
INPUT CABLES
FOR DC BALLASTS
DC BALLASTS
Coiled cable 25 - 51" (65 cm - 1.30 m)
with 4 - Pin XLR connector
Cable 6 ft. (1.8 m) with cigarette light
connector
Cable 22" (55 cm) with Anton / Bauer
connector
Cable 9" (22 cm) with Anton / Bauer
connector
Cable 6 ft. (1.8 m) with cigarette light
AB-S
Cable 6 ft. (1.8 m) with cigarette light
Cable 9" (22 cm) with Anton
/
Bauer
XLR
Coiled cable 25 - 51" (65 cm - 1.30 m)
with 4 - Pin XLR connector
DLBCA-V