Data Sheet

13
2.83
"
(72 mm
)
1.96 " 8.27
" (210 mm)
(50 mm )
6.42 " ( 263 mm )
2.83
" (
72 mm
)
1.96 "
(50 mm )
5.59 " ( 142 mm)
2.83
"
(72 mm
)
1.96 "
(50 mm )
6.73" (171 mm)
12.16" (309 mm)
7.60" (193 mm)
DEDOLIGHT
®
DLED4.1 POWER SUPPLY
DT4.1 AC power supply for DLED4.1
tungsten and daylight light heads.
Allows worldwide use from 90 - 264 V AC*
50/60 cycle plus continuous dimming.
The DT4.1-BI, same as above but with
extra control for continuous change of color
temperature from daylight to tungsten.
Add suffix “-DMX” for above ballasts with DMX
control DT4.1-DMX.
The DT4.1-BAT-XLR / DT4.1-BAT-AB (D-TAP) is
much smaller and allows operation from any
10,2-18V source.
The DT4.1-BI-BAT-XLR / DT4.1-BI-BAT-AB (D-TAP),
same as above but with extra control for
continuous change of color tempera ture from
daylight to tungsten.
POWER SUPPLY FOR AC OPERATION:
DT4.1, DT4.1-BI
Input Voltage
90 - 264 V AC *
50 VA / 0,5 - 0,21 A
47 W
Output Voltage
40 V
Controls
ON/OFF switch,
dimming knob
Dimming
Continuously from
100 - 0 %
Safety
Protection Class I,
IP40
Cable length
(plug - > power
supply)
Mains cable
8.2 ‘/ 2.5 m
Cable length
(plug - > light head)
Cable to light head
4.6 ‘/ 1.4 m
Mounting
Cable loop
Weight
2.2 lb /1,000 g
Size
L: 8.3" (210 mm)
W: 28" (72 mm)
H: 2" (50 mm)
*) functional range including tolerances
DT4.1
DT4.1-DMX
DT4.1-BI
DT4.1-BI-DMX
DT4.1- BAT
DT4.1- BI-BAT
input voltage: 10,2-18 V DC
Studio Version
DLED4.1SE-D
DLED4.1SE-T
DLED4.1SE-BI
DLED4.1SE-D-DMX
DLED4.1SE-T-DMX
DLED4.1SE-BI-DMX
Weight: 2.43 lb / 1,100 g
Weight: 0.75 lb / 340 g
Weight: 5.07 lb / 2,300 g
POWER OPTION FOR DLED4.1