Guide To Installation And Use Induction Hob DTi701 DTi704 DTi716 DTi718
Dear Customer, Thank you for buying a DE DIETRICH hob. Our research teams have designed a new generation of kitchen appliances. As a result of our unique expertise, we have produced a range of goods whose quality, design and technical advance are unsurpassed. You will find that the clean lines and modern look of your De Dietrich hob blends in perfectly with your kitchen décor. It is easy to use and performs to a high standard.
Contents 1/ Description of your appliance 2/ Overview / working principle 3/ Quick start guide 4/ Product / Safety features explained 7/ Cleaning and maintaining your appliance 8/ Installation guide 11/ Help Guide EN
Description EN DTi701 DTi701 Total dimensions (L x l) DTi701B/X: 30, 8cm x 52cm Recess cut-out (L’ x l’) DTi701B/X: 26, 5cm X 49cm DTi704 DTi704 Total dimensions (L x l) (L x l) DTi704B/X: 65cm x 52cm DTi704J/V: 63cm x 51cm Recess cut-out (L’ x l’) DTi704B/X: 56cm x 49cm DTi704J/V: 56cm x 49cm DTi716 DTi716 Total dimensions (L x l) (L x l) DTi716X: 65cm x 52cm DTi716V: 63cm x 51cm Recess cut-out (L’ x l’) DTi716X: 56cm x 49cm DTi716V: 56cm x 49cm DTi718 DTi718 Total dimensions (L x l) (L x l) DTi718J:
Working Principle EN A Induction coils B Glass insulating hob top C Ferrous pan base The induction principle The principle of induction is based on a magnetic effect. When you place your cookware on a cooking zone and you turn it on, the electronic circuits in your cooking hob produce “induced” currents in the bottom of the cookware which instantly raise its temperature. This heat is then transmitted to the food.
Quick Start Guide EN Controls Table E Power “+” and “-” controls F Power pre-set controls A Rear Left Cooking Zone Selector G Timer “+” and “-” Controls B Front Left Cooking Zone Selector H MeMo control C Rear right Cooking Zone Selector I Lock control D Front Right Cooking Zone Selector Quick Start Guide Prior to using you appliance you need to ensure the appliance has been installed in accordance with the installation instructions within this guide.
Additional functions and safety Features EN Protection against overflows. In case of overflow, or of a metallic object or wet cloth placed on the control areas, the hob turns itself off, the displays light up and a beep sounds. Clean the hob or remove the object, then begin cooking again. Temperature limiter. Each cooking zone is equipped with a safety sensor that constantly monitors the temperature of the bottom of the cookware.
Additional Functions and Safety Features EN Child Lock: for added peace of mind, the child lock can be manually activated to prevent accidental start-up. To activate the lock pres the “I” key and hold until a beep is sounded and an indicator appears. To de-activate hold the “I” key until the indicator goes out and a beep sounds. Control Lock: can be activated to lock the control panel during the cooking process. This will lock the controls set on the cooking zones but will allow the stop key to function.
Additional Functions and Safety Features EN Timer Functions Each zone of the appliance can be controlled by using the timer function to turn off the zone after a set period of time. Select the zone required and adjust the power as required. press the timer controls “G” and using the “+” or “-”keys select the cooking time required. The appliance will now count down the time and turn off as required. when the time remaining is less than 1 minute the display will indicate seconds remaining.
Cleaning and Maintaining your Appliance EN Preserve your appliance The vitroceramic glass surface is highly resistant, but not unbreakable. Here are some recommendations for increasing its lifetime: - Avoid banging or clattering the cookware. - Avoid putting heating covers on the hob. A suction effect may damage the vitroceramic surface. - Do not use cookware with bottoms that are rough or dented. - Do not use your cooking hob as a work surface.
Installation Guide EN Installation Your appliance should be positioned so that the mains switch is accessible. The distance between the edge of your appliance and the side and rear walls (or partitions) must be at least four centimetres (area A). Your appliance can be easily integrated above a cabinet, an oven or a build-in household appliance. Simply verify that the air intakes and outlets are free of obstruction, poor ventilation can affect both the performance of your appliance and reduce its lifespan.
Installation Guide EN Installing above a oven When installing your appliance above an oven, it may be necessary to remove the carcass support rail from the housing in order to ensure a 4mm air gap is maintained. Most modern ovens including all De Dietrich models will not require any further insulation between the oven and hob. It is not recommended to use the Pyro-clean function of an oven while using the hob.
Installation Guide EN Electrical connection Hook-up of 220-240V ~32 amp Hook-up of 220-240V ~16 amp •Hook-up of 2x230V 2L+2N ~ - 16A •Hook-up of 400V 2N ~ - 16A •Hook-up of 400V 3~ - 16A 10
Help Guide EN During Installation While switching on 11
Help Guide EN While in use 12
