Setup guide

DS2 Network Guide

This ensures current and recent information is always available.

The information detailed is; Time and date, Reset Code and Reason, Connection-status, Site and

ARC ID.

The typical log information should look like this:

System-Start : at 15:11:39 on 24-06-2004 UTC

System-Halt : at 15:11:28 on 24-06-2004 UTC

Restart code : 100

Restart reason : Controlled user RESET from Telnet or the webpages

Alarm-Log : Alarm initiated : Zone 1 at 15:11:59 on 24-06-2004 +0100

Connection-Status: request connection for Alarm Reporting at 15:11:59 on 24-06-2004 +0100

Connection-Status : Connection to 172.16.100.12\Ethernet at 15:11:59 on 24-06-2004 +0100

Site-Id: DS250

Arc-ID: DS2-50

System-Status:

Local-IP: 172.16.89.50

Activating-Channel: 3

Response-Images: 1

Response-Area: Zone 1

Response-Level: GREEN

Alarm-Time: 15:11:59 on 24-06-2004

Rec-Index: 14:11:59 on 24-06-2004

Connection-Status : Connection closed at 15:11:59 on 24-06-2004 +0100

Logle Backup

This le is updated every time the Logle reaches its maximum capacity. The Logle will

automatically write over the top of the existing Logle Backup to create a le containing information

that occurred recently.

Along with the Logle this ensures the current information and most recent information is available

for analysis.

The following is a typical example of the information held within the Logle Backup.

System-Start : at 15:47:41 on 04-06-2004 UTC

System-Halt : at 15:47:30 on 04-06-2004 UTC

Restart code : 100

Restart reason : Controlled user RESET from Telnet or the webpages

System-Status : Standard UNSET recording selected by timer at 15:47:42 on 04-06-2004 +0100

System-Status : Standard UNSET recording selected by timer at 15:47:43 on 04-06-2004 +0100