Setup guide
Dedicated Micros ©2006
95
DS2 Network Guide
Content-Type: text/html; charset=us-ascii;
Content-Transfer-Encoding: 7bit
<!doctype html public “-//w3c//dtd html 4.0 transitional//en”>
<html>
Site-Id: DS2<br>
System-Exception: Camera fail 3 at Wed Jun 30 14:21:26 2004 +0200<br>
</html>
250 OK
QUIT 221 closing connection
Sent Message Log
This logs all the SMS message information. There are various options that can be congured to
allow an SMS message to be sent; start up, alarms, etc.
The Sent Message Log, logs the information on the message sent including; the time and date,
sender and receiver details and the message that was sent.
The following shows a typical SMS message log for when the system starts up after power down or
reset.
Fri Mar 12 12:05:26 2004 +0000
SMS to: 07970972823
SMS message: STARTUP, TVDEMO, Fri Mar 12 11:15:06 2004 +0000, 0.0.0.0
SMS response: STARTUP, TVDEMO, FRI MAR 12 11:15:06 2004 +0000, 0.0.0.0
FTP Download Log
The unit can be congured to manual or automatically trigger and FTP download of images. These
downloads are logged and stored with the FTP Download Log for future analysis.
Logle
The Logle stores all information on every action that is carried out by the unit; when alarms are
received and actioned, resets, failed outward bound alarm connections, etc.
This is the current le and will continue to store data until it reaches its maximum size limit (typically
1Mb). This le then writes over the top of the Logle Backup and becomes the backup le and a
new logle is created.